Suppr超能文献

使用多孔 WO3、SiO2-WO3 及其负载 Au 的类似物降解亚甲基蓝:吸附和光催化研究。

Degradation of methylene blue using porous WO3, SiO2-WO3, and their Au-loaded analogs: adsorption and photocatalytic studies.

机构信息

Department of Chemistry, University of Vermont , 82 University Place, Burlington, Vermont 05405, United States.

出版信息

ACS Appl Mater Interfaces. 2015 Jan 28;7(3):1987-96. doi: 10.1021/am507806a. Epub 2015 Jan 16.

Abstract

A facile sonochemical approach was used to deposit 3-5 nm monodisperse gold nanoparticles on porous SiO2-WO3 composite spheres, as confirmed by powder X-ray diffraction (XRD) and transmission electron microscopy (TEM). High-resolution TEM (HR-TEM) and energy dispersive X-ray spectroscopy (EDS) further characterized the supported Au nanoparticles within the Au-SiO2-WO3 composite. These analyses showed isolated Au nanoparticles within both SiO2- and WO3-containing regions. Selective etching of the SiO2 matrix from Au-SiO2-WO3 yielded a pure Au-WO3 material with well-dispersed 10 nm Au nanoparticles and moderate porosity. This combined sonochemical-nanocasting technique has not been previously used to synthesize Au-WO3 photocatalysts. Methylene blue (MB) served as a probe for the adsorption capacity and visible light photocatalytic activity of these WO3-containing catalysts. Extensive MB demethylation (azures A, B, C, and thionine) and polymerization of these products occurred over WO3 under dark conditions, as confirmed by electrospray ionization mass spectrometry (ESI-MS). Photoirradiation of these suspensions led to further degradation primarily through demethylation and polymerization pathways, regardless of the presence of Au nanoparticles. Ring-opening sulfur oxidation to the sulfone was a secondary photocatalytic pathway. According to UV-vis spectroscopy, pure WO3 materials showed superior MB adsorption compared to SiO2-WO3 composites. Compared to their respective nonloaded catalysts, Au-SiO2-WO3 and Au-WO3 catalysts exhibited enhanced visible light photocatalytic activity toward the degradation of MB. Specifically, the rates of MB degradation over Au-WO3 and Au-SiO2-WO3 during 300 min of irradiation were faster than those over their nonloaded counterparts (WO3 and SiO2-WO3). These studies highlight the ability of Au-WO3 to serve as an excellent adsorbant and photodegradation catalyst toward MB.

摘要

一种简便的超声化学方法被用于在多孔 SiO2-WO3 复合球体上沉积 3-5nm 的单分散金纳米粒子,这一点通过粉末 X 射线衍射 (XRD) 和透射电子显微镜 (TEM) 得到了证实。高分辨率透射电子显微镜 (HR-TEM) 和能量色散 X 射线能谱 (EDS) 进一步对 Au-SiO2-WO3 复合载体中的负载金纳米粒子进行了表征。这些分析表明,在含有 SiO2 和 WO3 的区域内均存在孤立的 Au 纳米粒子。通过对 Au-SiO2-WO3 进行 SiO2 基质的选择性刻蚀,得到了一种具有良好分散性的 10nmAu 纳米粒子和适度多孔性的纯 Au-WO3 材料。这种超声化学-纳米铸造技术以前没有被用于合成 Au-WO3 光催化剂。亚甲基蓝 (MB) 被用作这些 WO3 负载催化剂的吸附能力和可见光光催化活性的探针。在黑暗条件下,WO3 可以使 MB 发生广泛的去甲基化 (azuves A、B、C 和硫堇) 和聚合,这一点通过电喷雾电离质谱 (ESI-MS) 得到了证实。这些悬浮液的光照射导致进一步的降解,主要通过去甲基化和聚合途径进行,而与 Au 纳米粒子的存在与否无关。开环硫氧化生成砜是次要的光催化途径。根据紫外可见光谱,纯 WO3 材料显示出比 SiO2-WO3 复合材料更好的 MB 吸附能力。与各自的未负载催化剂相比,Au-SiO2-WO3 和 Au-WO3 催化剂在可见光下对 MB 的光降解表现出增强的光催化活性。具体而言,在 300min 的照射期间,Au-WO3 和 Au-SiO2-WO3 上 MB 的降解速率比它们的未负载对应物 (WO3 和 SiO2-WO3) 更快。这些研究突出了 Au-WO3 作为 MB 的优秀吸附剂和光降解催化剂的能力。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验