Nguyen Thu-Mai, Arnal Bastien, Song Shaozhen, Huang Zhihong, Wang Ruikang K, O'Donnell Matthew
University of Washington, Department of Bioengineering, 3720 15th Avenue NE, P.O. Box 355013, Seattle, Washington 98105, United States.
University of Washington, Department of Bioengineering, 3720 15th Avenue NE, P.O. Box 355013, Seattle, Washington 98105, United StatesbUniversity of Dundee, School of Engineering, Departments of Physics and Mathematics, Fulton Building, Dundee DD1 4HN, Un.
J Biomed Opt. 2015 Jan;20(1):016001. doi: 10.1117/1.JBO.20.1.016001.
Investigating the elasticity of ocular tissue (cornea and intraocular lens) could help the understanding and management of pathologies related to biomechanical deficiency. In previous studies, we introduced a setup based on optical coherence tomography for shear wave elastography (SWE) with high resolution and high sensitivity. SWE determines tissue stiffness from the propagation speed of shear waves launched within tissue. We proposed acoustic radiation force to remotely induce shear waves by focusing an ultrasound (US) beam in tissue, similar to several elastography techniques. Minimizing the maximum US pressure is essential in ophthalmology for safety reasons. For this purpose, we propose a pulse compression approach. It utilizes coded US emissions to generate shear waves where the energy is spread over a long emission, and then numerically compressed into a short, localized, and high-energy pulse. We used a 7.5-MHz single-element focused transducer driven by coded excitations where the amplitude is modulated by a linear frequency-swept square wave (1 to 7 kHz). An inverse filter approach was used for compression. We demonstrate the feasibility of performing shear wave elastography measurements in tissue-mimicking phantoms at low US pressures (mechanical index < 0.6)
研究眼部组织(角膜和人工晶状体)的弹性有助于理解和处理与生物力学缺陷相关的病理情况。在先前的研究中,我们介绍了一种基于光学相干断层扫描的高分辨率、高灵敏度剪切波弹性成像(SWE)装置。SWE通过组织内剪切波的传播速度来确定组织硬度。我们提出利用声辐射力,通过在组织中聚焦超声(US)束来远程诱导剪切波,这与几种弹性成像技术类似。出于安全考虑,在眼科中使最大US压力最小化至关重要。为此,我们提出一种脉冲压缩方法。它利用编码的US发射来产生剪切波,其中能量分布在较长的发射过程中,然后通过数值压缩成一个短的、局部的、高能脉冲。我们使用由编码激励驱动的7.5MHz单元素聚焦换能器,其中幅度由线性扫频方波(1至7kHz)调制。采用逆滤波方法进行压缩。我们证明了在低US压力(机械指数<0.6)下在组织模拟体模中进行剪切波弹性成像测量的可行性