Agnew Sonya P, Ljungquist Karin L, Huang Jerry I
Department of Plastic Surgery, Jesse Brown VAMC, Chicago IL.
Department of Orthopaedics, Kaiser Permanente, Portland, OR.
J Hand Surg Am. 2015 Jun;40(6):1102-5. doi: 10.1016/j.jhsa.2015.02.026. Epub 2015 Apr 2.
To define a danger zone for volar plates using magnetic resonance imaging by analyzing the position of the flexor tendons at risk around the watershed line.
We analyzed 40 wrist magnetic resonance images. The location of the flexor pollicus longus (FPL) and index flexor digitorum profundus (FDPi) tendons was recorded at 3 and 6 mm proximal to the watershed line of the distal radius. We measured the distance between the volar margin of the distal radius and the FPL and FDPi tendons, and the coronal position of the tendons.
At a point 3 mm proximal to the watershed line, FPL and FDPi were located on average 2.6 and 2.2 mm anterior to the volar margin of the distal radius. This distance increased to 4.7 and 5.3 mm at a point 6 mm proximal to the watershed line. The FPL and FDPi were located at 57% and 42% of the total width of the distal radius from the sigmoid notch at 3 mm from the watershed, and at 66% and 46% at 6 mm from the watershed.
Surgeons should be aware of the close proximity of the flexor tendons to the volar cortex of the distal radius proximal to the watershed line and their radial to ulnar position. Three millimeters proximal to the watershed line, plate placement more than 2 mm anterior to the volar cortex or the use of plates thicker than 2 mm poses a high risk for directly contacting flexor tendons.
This article may prove to be helpful in avoiding flexor tendon injury during volar plate fixation.
通过分析分水岭线周围有风险的屈肌腱位置,利用磁共振成像确定掌板的危险区域。
我们分析了40例腕部磁共振图像。记录桡骨远端分水岭线近端3毫米和6毫米处拇长屈肌腱(FPL)和示指深屈肌腱(FDPi)的位置。我们测量了桡骨远端掌侧边缘与FPL和FDPi肌腱之间的距离以及肌腱的冠状位位置。
在分水岭线近端3毫米处,FPL和FDPi平均位于桡骨远端掌侧边缘前方2.6毫米和2.2毫米处。在分水岭线近端6毫米处,该距离增加到4.7毫米和5.3毫米。在距分水岭3毫米处,FPL和FDPi分别位于桡骨远端从乙状切迹起总宽度的57%和42%处,在距分水岭6毫米处分别位于66%和46%处。
外科医生应意识到分水岭线近端屈肌腱与桡骨远端掌侧皮质紧密相邻及其桡侧至尺侧的位置。在分水岭线近端3毫米处,钢板放置在掌侧皮质前方超过2毫米或使用厚度超过2毫米的钢板会有直接接触屈肌腱的高风险。
本文可能有助于在掌板固定过程中避免屈肌腱损伤。