Mohammad Mirzaie M A, Kalbasi M, Mousavi S M, Ghobadian B
a Department of Chemical Engineering , Amirkabir University of Technology , Tehran , Iran.
b Biotechnology Group, Department of Chemical Engineering , Tarbiat Modares University , Tehran , Iran.
Prep Biochem Biotechnol. 2016 May 18;46(4):368-75. doi: 10.1080/10826068.2015.1031398.
Chlorella vulgaris (C. vulgaris) microalga was investigated as a new potential feedstock for the production of biodegradable lubricant. In order to enhance microalgae lipid for biolubricant production, mixotrophic growth of C. vulgaris was optimized using statistical analysis of Plackett-Burman (P-B) and response surface methodology (RSM). A cheap substrate-based medium of molasses and corn steep liquor (CSL) was used instead of expensive mineral salts to reduce the total cost of microalgae production. The effects of molasses and CSL concentration (cheap substrates) and light intensity on the growth of microalgae and their lipid content were analyzed and modeled. Designed models by RSM showed good compatibility with a 95% confidence level when compared to the cultivation system. According to the models, optimal cultivation conditions were obtained with biomass productivity of 0.123 g L(-1) day(-1) and lipid dry weight of 0.64 g L(-1) as 35% of dry weight of C. vulgaris. The extracted microalgae lipid presented useful fatty acid for biolubricant production with viscosities of 42.00 cSt at 40°C and 8.500 cSt at 100°C, viscosity index of 185, flash point of 185°C, and pour point of -6°C. These properties showed that microalgae lipid could be used as potential feedstock for biolubricant production.
普通小球藻(C. vulgaris)微藻被作为生产可生物降解润滑剂的一种新的潜在原料进行了研究。为了提高用于生物润滑剂生产的微藻脂质,利用Plackett-Burman(P-B)统计分析和响应面方法(RSM)对普通小球藻的混合营养生长进行了优化。使用了由糖蜜和玉米浆(CSL)组成的低成本基于底物的培养基来替代昂贵的矿物盐,以降低微藻生产的总成本。分析并建立了糖蜜和CSL浓度(廉价底物)以及光照强度对微藻生长及其脂质含量影响的模型。与培养系统相比,RSM设计的模型在95%置信水平下显示出良好的兼容性。根据模型,获得了最佳培养条件,生物量生产率为0.123 g L⁻¹ day⁻¹,脂质干重为0.64 g L⁻¹,占普通小球藻干重的35%。提取的微藻脂质呈现出对生物润滑剂生产有用的脂肪酸,在40°C时粘度为42.00 cSt,在100°C时粘度为8.500 cSt,粘度指数为185,闪点为185°C,倾点为-6°C。这些特性表明微藻脂质可作为生物润滑剂生产的潜在原料。