†Synthetic Chemistry, Max-Planck-Institute for Polymer Research, Ackermannweg 10, 55128 Mainz, Germany.
‡Humboldt-Universität zu Berlin, Institut f. Physik, Brook-Taylor-Strasse 6, 12489 Berlin, Germany.
J Am Chem Soc. 2015 Jun 24;137(24):7678-85. doi: 10.1021/ja512897m. Epub 2015 Jun 12.
Here we present the formation of predominantly sp(2)-coordinate carbon with magnetic- and heteroatom-induced structural defects in a graphene lattice by a stoichiometric dehalogenation of perchlorinated (hetero)aromatic precursors [hexachlorobenzene, C6Cl6 (HCB), and pentachloropyridine, NC5Cl5 (PCP)] with transition metals such as copper in a combustion synthesis. This route allows the build-up of a carbon lattice by a chemistry free of hydrogen and oxygen compared to other pyrolytic approaches and yields either nitrogen-doped or -undoped graphene domains depending on the precursor. The resulting carbon was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy, photoelectron spectroscopy (XPS), and SQUID magnetometry to gain information on its morphological, chemical, and electronic structure and on the location of the nitrogen atoms within the carbon lattice. A significant lowering of the magnetization was observed for the nitrogen-doped carbon obtained by this method, which exhibits less ordered graphene domains in the range of approximately 10-30 nm as per TEM analysis compared to the nondoped carbon resulting from the reaction of HCB with larger graphene domains as per TEM and the presence of a 2D mode in the Raman spectra. The decrease of the magnetization by nitrogen doping within the sp(2)-coordinate carbon lattice can be attributed to an increase in pyrrole-type defects along with a reduction in radical defects originating from five-membered carbon ring structures as well as changes in the π-electron density of edge states.
在这里,我们通过过渡金属(如铜)在燃烧合成中对全氯(杂)芳族前体(六氯苯,C6Cl6(HCB)和五氯吡啶,NC5Cl5(PCP))进行化学计量脱卤,展示了在石墨烯晶格中形成主要由 sp(2)配位的碳,并带有磁性和杂原子诱导的结构缺陷。与其他热解方法相比,这种方法通过不含氢和氧的化学方法构建了碳晶格,并根据前体生成氮掺杂或未掺杂的石墨烯畴。所得碳通过扫描电子显微镜 (SEM)、透射电子显微镜 (TEM)、拉曼光谱、光电子能谱 (XPS) 和超导量子干涉磁强计进行了表征,以获取其形态、化学和电子结构以及氮原子在碳晶格中的位置的信息。通过这种方法获得的氮掺杂碳的磁化强度显著降低,与 TEM 分析相比,其具有较少有序的石墨烯畴,范围约为 10-30nm,而未经掺杂的碳则来自 HCB 与较大的石墨烯畴的反应,并且在拉曼光谱中存在 2D 模式。氮掺杂在 sp(2)配位碳晶格中引起的磁化强度降低可归因于吡咯型缺陷的增加,以及源自五元碳环结构的自由基缺陷的减少,以及边缘态π电子密度的变化。