Reineke Kai, Schottroff Felix, Meneses Nicolas, Knorr Dietrich
Quality and Safety of Food and Feed, Leibniz Institute for Agricultural Engineering Potsdam, Germany ; Department of Food Biotechnology and Food Process Engineering, Technische Universitaet Berlin Berlin, Germany.
Department of Food Biotechnology and Food Process Engineering, Technische Universitaet Berlin Berlin, Germany.
Front Microbiol. 2015 May 6;6:400. doi: 10.3389/fmicb.2015.00400. eCollection 2015.
The intention of this study was to investigate the inactivation of endospores by a combined thermal and pulsed electric field (PEF) treatment. Therefore, self-cultivated spores of Bacillus subtilis and commercial Geobacillus stearothermophilus spores with certified heat resistance were utilized. Spores of both strains were suspended in saline water (5.3 mS cm(-1)), skim milk (0.3% fat; 5.3 mS cm(-1)) and fresh prepared carrot juice (7.73 mS cm(-1)). The combination of moderate preheating (70-90°C) and an insulated PEF-chamber, combined with a holding tube (65 cm) and a heat exchanger for cooling, enabled a rapid heat up to 105-140°C (measured above the PEF chamber) within 92.2-368.9 μs. To compare the PEF process with a pure thermal inactivation, each spore suspension was heat treated in thin glass capillaries and D-values from 90 to 130°C and its corresponding z-values were calculated. For a comparison of the inactivation data, F-values for the temperature fields of both processes were calculated by using computational fluid dynamics (CFD). A preheating of saline water to 70°C with a flow rate of 5 l h(-1), a frequency of 150 Hz and an energy input of 226.5 kJ kg(-1), resulted in a measured outlet temperature of 117°C and a 4.67 log10 inactivation of B. subtilis. The thermal process with identical F-value caused only a 3.71 log10 inactivation. This synergism of moderate preheating and PEF was even more pronounced for G. stearothermophilus spores in saline water. A preheating to 95°C and an energy input of 144 kJ kg(-1) resulted in an outlet temperature of 126°C and a 3.28 log10 inactivation, whereas nearly no inactivation (0.2 log10) was achieved during the thermal treatment. Hence, the PEF technology was evaluated as an alternative ultra-high temperature process. However, for an industrial scale application of this process for sterilization, optimization of the treatment chamber design is needed to reduce the occurring inhomogeneous temperature fields.
本研究旨在探讨热与脉冲电场(PEF)联合处理对内芽孢杆菌的灭活效果。因此,使用了自行培养的枯草芽孢杆菌芽孢以及具有经认证耐热性的嗜热栖热放线菌商业芽孢。两种菌株的芽孢均悬浮于盐水(5.3 mS cm(-1))中、脱脂奶(0.3%脂肪;5.3 mS cm(-1))中以及新鲜制备的胡萝卜汁(7.73 mS cm(-1))中。适度预热(70 - 90°C)与绝缘的PEF室相结合,再加上一个保持管(65 cm)和一个用于冷却的热交换器,能够在92.2 - 368.9 μs内将温度迅速升至105 - 140°C(在PEF室上方测量)。为了将PEF处理与纯热灭活进行比较,每种芽孢悬浮液在细玻璃毛细管中进行热处理,并计算90至130°C的D值及其相应的z值。为了比较灭活数据,通过使用计算流体动力学(CFD)计算了两个过程温度场的F值。以5 l h(-1)的流速将盐水预热至70°C,频率为150 Hz,能量输入为226.5 kJ kg(-1),测得出口温度为117°C,枯草芽孢杆菌的灭活对数为4.67 log10。具有相同F值的热过程仅导致3.71 log10的灭活。对于嗜热栖热放线菌芽孢在盐水中,适度预热和PEF的这种协同作用更为明显。预热至95°C且能量输入为144 kJ kg(-1),导致出口温度为126°C,灭活对数为3.28 log10,而在热处理过程中几乎没有灭活(0.2 log10)。因此,PEF技术被评估为一种替代的超高温处理方法。然而,对于该灭菌过程的工业规模应用,需要优化处理室设计以减少出现的不均匀温度场。