Suppr超能文献

温度对水中十二烷基硫酸钠胶束纳米结构的影响。

Temperature Effect on the Nanostructure of SDS Micelles in Water.

作者信息

Hammouda Boualem

机构信息

National Institute of Standards and Technology, Gaithersburg, MD 20899.

出版信息

J Res Natl Inst Stand Technol. 2013 Apr 11;118:151-67. doi: 10.6028/jres.118.008. eCollection 2013.

Abstract

Sodium dodecyl sulfate (SDS) surfactants form micelles when dissolved in water. These are formed of a hydrocarbon core and hydrophilic ionic surface. The small-angle neutron scattering (SANS) technique was used with deuterated water (D2O) in order to characterize the micelle structure. Micelles were found to be slightly compressed (oblate ellipsoids) and their sizes shrink with increasing temperature. Fits of SANS data to the Mean Spherical Approximation (MSA) model yielded a calculated micelle volume fraction which was lower than the SDS surfactant (sample mixing) volume fraction; this suggests that part of the SDS molecules do not participate in micelle formation and remain homogeneously mixed in the solvent. A set of material balance equations allowed the estimation of the SDS fraction in the micelles. This fraction was found to be high (close to one) except for samples around 1 % SDS fraction. The micelle aggregation number was found to decrease with increasing temperature and/or decreasing SDS fraction.

摘要

十二烷基硫酸钠(SDS)表面活性剂溶解于水时会形成胶束。这些胶束由碳氢化合物核心和亲水离子表面构成。使用小角中子散射(SANS)技术和重水(D₂O)来表征胶束结构。发现胶束略微压缩(扁椭球体),并且其尺寸随温度升高而缩小。将SANS数据拟合到平均球近似(MSA)模型得到的计算胶束体积分数低于SDS表面活性剂(样品混合)体积分数;这表明部分SDS分子不参与胶束形成,而是均匀地混合在溶剂中。一组物料平衡方程可用于估算胶束中的SDS分数。发现该分数很高(接近1),除了SDS分数约为1%的样品。发现胶束聚集数随温度升高和/或SDS分数降低而减少。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/b39e/4487321/769830fb478f/jres.118.008f1.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验