Suppr超能文献

两款具有不同设计特点的共聚焦微X射线荧光光谱仪的比较。

Comparison of two confocal micro-XRF spectrometers with different design aspects.

作者信息

Smolek S, Nakazawa T, Tabe A, Nakano K, Tsuji K, Streli C, Wobrauschek P

机构信息

Atominstitut, Vienna University of Technology 1020, Wien, Austria.

Department of Applied Chemistry & Bioengineering, Graduate School of Engineering, Osaka City University 3-3-138, Sugimoto, Sumiyoshi, Osaka, 558-8585, Japan ; Department of Applied Chemistry, Faculty of Science and Engineering, Chuo University 1-13-27 Kasuga, Bunkyo-ku, Tokyo, 112-85851, Japan.

出版信息

Xray Spectrom. 2014 Mar;43(2):93-101. doi: 10.1002/xrs.2521. Epub 2013 Nov 6.

Abstract

Two different confocal micro X-ray fluorescence spectrometers have been developed and installed at Osaka City University and the Vienna University of Technology Atominstitut. The Osaka City University system is a high resolution spectrometer operating in air. The Vienna University of Technology Atominstitut spectrometer has a lower spatial resolution but is optimized for light element detection and operates under vacuum condition. The performance of both spectrometers was compared. In order to characterize the spatial resolution, a set of nine specially prepared single element thin film reference samples (500 nm in thickness, Al, Ti, Cr, Fe Ni, Cu, Zr, Mo, and Au) was used. Lower limits of detection were determined using the National Institute of Standards and Technology standard reference material glass standard 1412. A paint layer sample (cultural heritage application) and paint on automotive steel samples were analyzed with both instruments. The depth profile information was acquired by scanning the sample perpendicular to the surface. © 2013 The Authors. published by John Wiley & Sons, Ltd.

摘要

大阪市立大学和维也纳工业大学阿托米研究所已开发并安装了两台不同的共焦微 X 射线荧光光谱仪。大阪市立大学的系统是一台在空气中运行的高分辨率光谱仪。维也纳工业大学阿托米研究所的光谱仪空间分辨率较低,但针对轻元素检测进行了优化,且在真空条件下运行。对这两台光谱仪的性能进行了比较。为了表征空间分辨率,使用了一组九个特别制备的单元素薄膜参考样品(厚度为 500 纳米,包括铝、钛、铬、铁、镍、铜、锆、钼和金)。使用美国国家标准与技术研究院的标准参考材料玻璃标准 1412 确定检测下限。用这两台仪器对一个漆层样品(文化遗产应用)和汽车钢上的漆样进行了分析。通过垂直于样品表面扫描来获取深度剖面信息。© 2013 作者。由 John Wiley & Sons, Ltd. 出版

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/cb9c/4579790/df868ac6ed5c/xrs0043-0093-f1.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验