Ikeda Teiichiro, Yoshizawa Shin, Koizumi Norihiro, Mitsuishi Mamoru, Matsumoto Yoichiro
Central Research Laboratory, Hitachi Ltd., Tokyo, Japan.
Department of Communications Engineering, Tohoku University, Sendai, Miyagi, Japan.
Adv Exp Med Biol. 2016;880:113-29. doi: 10.1007/978-3-319-22536-4_7.
Shock wave lithotripsy has generally been a first choice for kidney stone removal. The shock wave lithotripter uses an order of microsecond pulse durations and up to a 100 MPa pressure spike triggered at approximately 0.5-2 Hz to fragment kidney stones through mechanical mechanisms. One important mechanism is cavitation. We proposed an alternative type of lithotripsy method that maximizes cavitation activity to disintegrate kidney stones using high-intensity focused ultrasound (HIFU). Here we outline the method according to the previously published literature (Matsumoto et al., Dynamics of bubble cloud in focused ultrasound. Proceedings of the second international symposium on therapeutic ultrasound, pp 290-299, 2002; Ikeda et al., Ultrasound Med Biol 32:1383-1397, 2006; Yoshizawa et al., Med Biol Eng Comput 47:851-860, 2009; Koizumi et al., A control framework for the non-invasive ultrasound the ragnostic system. Proceedings of 2009 IEEE/RSJ International Conference on Intelligent Robotics and Systems (IROS), pp 4511-4516, 2009; Koizumi et al., IEEE Trans Robot 25:522-538, 2009). Cavitation activity is highly unpredictable; thus, a precise control system is needed. The proposed method comprises three steps of control in kidney stone treatment. The first step is control of localized high pressure fluctuation on the stone. The second step is monitoring of cavitation activity and giving feedback on the optimized ultrasound conditions. The third step is stone tracking and precise ultrasound focusing on the stone. For the high pressure control we designed a two-frequency wave (cavitation control (C-C) waveform); a high frequency ultrasound pulse (1-4 MHz) to create a cavitation cloud, and a low frequency trailing pulse (0.5 MHz) following the high frequency pulse to force the cloud into collapse. High speed photography showed cavitation collapse on a kidney stone and shock wave emission from the cloud. We also conducted in-vitro erosion tests of model and natural kidney stones. For the model stones, the erosion rate of the C-C waveform showed a distinct advantage with the combined high and low frequency waves over either wave alone. For optimization of the high frequency ultrasound intensity, we investigated the relationship between subharmonic emission from cavitation bubbles and stone erosion volume. For stone tracking we have also developed a non-invasive ultrasound theragnostic system (NIUTS) that compensates for kidney motion. Natural stones were eroded and most of the resulting fragments were less than 1 mm in diameter. The small fragments were small enough to pass through the urethra. The results demonstrate that, with the precise control of cavitation activity, focused ultrasound has the potential to be used to develop a less invasive and more controllable lithotripsy system.
冲击波碎石术通常是肾结石清除的首选方法。冲击波碎石机使用微秒级脉冲持续时间,并在约0.5 - 2赫兹触发高达100兆帕的压力峰值,通过机械机制破碎肾结石。一个重要机制是空化作用。我们提出了一种替代类型的碎石术方法,即使用高强度聚焦超声(HIFU)最大化空化活动以分解肾结石。在此,我们根据先前发表的文献(松本等人,聚焦超声中气泡云的动力学。第二届治疗超声国际研讨会论文集,第290 - 299页,2002年;池田等人,超声医学与生物学32:1383 - 1397,2006年;吉泽等人,医学与生物工程计算47:851 - 860,2009年;小泉等人,用于非侵入性超声诊断系统的控制框架。2009年IEEE/RSJ国际智能机器人与系统会议(IROS)论文集,第4511 - 4516页,2009年;小泉等人,IEEE机器人学报25:522 - 538,2009年)概述该方法。空化活动极难预测,因此需要一个精确的控制系统。所提出的方法在肾结石治疗中包括三个控制步骤。第一步是控制结石上的局部高压波动。第二步是监测空化活动并反馈优化后的超声条件。第三步是结石跟踪以及精确地将超声聚焦于结石。对于高压控制,我们设计了一种双频波(空化控制(C - C)波形);一个高频超声脉冲(1 - 4兆赫)以产生空化云,以及一个跟随高频脉冲的低频拖尾脉冲(0.5兆赫)以使空化云坍塌。高速摄影显示了肾结石上的空化坍塌以及空化云发出的冲击波。我们还对模型肾结石和天然肾结石进行了体外侵蚀试验。对于模型结石,C - C波形的侵蚀率在高频和低频波组合时相对于单独的任何一种波都显示出明显优势。为了优化高频超声强度,我们研究了空化气泡的次谐波发射与结石侵蚀体积之间的关系。对于结石跟踪,我们还开发了一种补偿肾脏运动的非侵入性超声诊断系统(NIUTS)。天然结石被侵蚀,产生的大多数碎片直径小于1毫米。这些小碎片小到足以通过尿道。结果表明,通过对空化活动的精确控制,聚焦超声有潜力用于开发一种侵入性更小且更可控的碎石术系统。