Liu Gabriel, Buchowski Jacob M, Riew K Daniel
Department of Orthopaedic Surgery, Yong Loo Lin School of Medicine, National University of Singapore and University Spine Centre, University Orthopaedics, Hand and Reconstructive Microsurgery Cluster, National University Hospital, Singapore.
Department of Orthopaedic Surgery, University, St. Louis, MO, USA.
Asian Spine J. 2015 Dec;9(6):849-54. doi: 10.4184/asj.2015.9.6.849. Epub 2015 Dec 8.
Retrospective study.
To investigate safety profile of open door laminoplasty plates.
Few reports have documented potential complications related to the use of cervical laminoplasty plates.
Records and radiographs of consecutive plated laminoplasty patients of one academic surgeon were analyzed. Group 1 had screw back-out, defined as change in screw position, and group 2 did not.
Forty-two patients (mean age, 56.9) underwent "open-door" cervical laminoplasty using 165 plates. Mean follow-up was 24 months (range, 12-49 months). Mean Nurick grade improved from 2.1 to 0.9 postoperatively. Cervical lordosis (C2-7) was 12.1° preoperatively and 10.0° postoperatively. Range-of-motion was 27.0° preoperatively and 23.4° postoperatively. Partial screw back-out was noted in 27 of 165 plates (16.4%) and in 34 of 660 screws (5.2%). Of the 34 screws, 27 (79.4%) were at either the most cranial (12/27, 44.4%) or the most caudal (15/27, 55.5%) level. Cranially, 11/12 screws (91.7%) had back-out. Caudally, 9/15 lateral mass screws (60.0%) backed-out versus 6 laminar screws (40.0%). Of the 22 patients with screw back-out, 15 (68.2%) occurred <3 months postoperative and 6 (27.3%) occurred 4-12 months postoperative. No statistical differences were found between group 1 and 2 for age, gender, preoperative and postoperative lordosis, focal sagittal alignment, range-of-motion, or Nurick grade. Despite screw backout in 22 patients, there were no plate dislodgements, laminoplasty closure, or neurological deterioration.
Although screw back-out may occur with the use of cervical laminoplasty plates, the use of these plates without a bone block appears to be safe and reliable. As screw back-out is most common at the cranial and caudal ends of the laminoplasty, we recommend using the maximum number of screws (typically 2 for the lateral mass and 2 for the spinous process) at these levels to secure the plate to the bone.
回顾性研究。
探讨开门式椎板成形术钢板的安全性。
很少有报告记录与颈椎椎板成形术钢板使用相关的潜在并发症。
分析了一位学术外科医生连续进行钢板固定椎板成形术患者的记录和X线片。第1组为螺钉退出,定义为螺钉位置改变,第2组未出现螺钉退出。
42例患者(平均年龄56.9岁)使用165块钢板进行了“开门式”颈椎椎板成形术。平均随访24个月(范围12 - 49个月)。术后Nurick分级平均从2.1改善至0.9。颈椎前凸(C2 - 7)术前为12.1°,术后为10.0°。活动范围术前为27.0°,术后为23.4°。165块钢板中有27块(16.4%)出现部分螺钉退出,660枚螺钉中有34枚(5.2%)出现螺钉退出。在34枚退出的螺钉中,27枚(79.4%)位于最上端(12/27,44.4%)或最下端(15/27,55.5%)节段。在上端,12枚螺钉中有11枚(91.7%)出现退出。在下端,15枚侧块螺钉中有9枚(60.0%)退出,而椎板螺钉有6枚(40.0%)退出。在22例出现螺钉退出的患者中,15例(68.2%)发生在术后3个月内,6例(27.3%)发生在术后4 - 12个月。第1组和第2组在年龄、性别、术前和术后前凸、局部矢状位对线、活动范围或Nurick分级方面未发现统计学差异。尽管22例患者出现螺钉退出,但未出现钢板移位、椎板成形术闭合或神经功能恶化。
尽管使用颈椎椎板成形术钢板可能会出现螺钉退出,但不使用骨块使用这些钢板似乎是安全可靠的。由于螺钉退出在椎板成形术的上端和下端最为常见,我们建议在这些节段使用最大数量的螺钉(通常侧块2枚,棘突2枚)将钢板固定于骨。