Truedsson Anna, Wang Jian-Sheng, Lindberg Pia, Warfvinge Gunnar
Department of Oral Pathology, Faculty of Odontology, Malmö University, Malmö SE-205 06, Sweden.
Department of Orthopedics, Lund University Hospital, Lund SE-221 85, Sweden.
J Funct Biomater. 2016 Jan 7;7(1):2. doi: 10.3390/jfb7010002.
The purpose was to investigate whether a new biphasic and injectable ceramic bone substitute Cerament™ that rapidly remodels to bone, may contribute to the retention of titanium implant screws during the healing period, and to analyze the pattern of bone formation around titanium implants.Titanium screws were implanted in rat tibiae and embedded with or without Cerament™ on the cortical surface. Torsional resistance was measured after 1 day, and after 6 and 12 weeks. Implant areas without bone substitute were analyzed histologically for comparison. The torsional resistance increased over time as the screws were osseointegrated. There was no difference in resistance between screws embedded in the bone substitute and control screws. The bone apposition was more pronounced on the proximal side of the screw than on the distal side. Cerament™ is capable of conducting bone growth from a cortical bone surface. The newly formed bone in this application does not significantly add to the osseointegrative strength of the implant screw, as measured by torque resistance, during the first 12 weeks.
目的是研究一种新型双相可注射陶瓷骨替代物Cerament™,其能快速重塑为骨,是否有助于在愈合期保留钛种植体螺钉,并分析钛种植体周围的骨形成模式。将钛螺钉植入大鼠胫骨,并在皮质表面植入或不植入Cerament™。在1天、6周和12周后测量扭转阻力。对未使用骨替代物的种植区域进行组织学分析以作比较。随着螺钉骨整合,扭转阻力随时间增加。植入骨替代物的螺钉与对照螺钉之间的阻力没有差异。螺钉近端的骨附着比远端更明显。Cerament™能够从皮质骨表面引导骨生长。在本应用中,通过扭矩阻力测量,在最初12周内新形成的骨并未显著增加种植体螺钉的骨整合强度。