Lin Zhong, Ke Zhi Sheng, Zheng Qian, Zhao Zhen Quan, Song Zong Ming
The Eye Hospital, School of Ophthalmology and Optometry, Wenzhou Medical University, Wenzhou, Zhejiang 325027, China.
J Ophthalmol. 2016;2016:4182693. doi: 10.1155/2016/4182693. Epub 2016 Jun 22.
Purpose. To report a new approach for removal of silicone oil. Methods. All surgeries were performed using 23-gauge vitrectomy system with two transconjunctival sutureless cannulas. At the beginning, most of the silicone oil was removed by traditional microinvasive vitrectomy system through inferior-temporal cannula. Then, the blood transfusion tube is removed from the inferior-temporal cannula, and the fluid-air exchange is performed. A passive fluid-air exchange was performed to aspirate the residual silicone oil after gradually turning the patient's head temporally by approximately 90° gradually. Results. After the surgery, all patients had a clear anterior chamber and vitreous cavity on slit lamp and B scan examination, respectively. The mean time taken for silicone oil removal and total surgery was 8.0 ± 1.4 minutes and 12.4 ± 2.5 minutes, respectively. The mean intraocular pressure 1 day, 3 days, 1 week, 1 month, and 3 months after surgery was 9.0 ± 5.8 mmHg, 11.3 ± 7.6 mmHg, 16.1 ± 6.9 mmHg, 17.7 ± 4.8 mmHg, and 17.1 ± 3.5 mmHg, respectively. Conclusion. This new approach may provide a safe and fast method to remove the silicone oil.
目的。报告一种去除硅油的新方法。方法。所有手术均使用带有两个经结膜无缝合套管的23G玻璃体切割系统进行。开始时,大部分硅油通过传统的微创玻璃体切割系统经颞下套管去除。然后,将输血管道从颞下套管移除,并进行液气交换。在将患者头部逐渐向颞侧转动约90°后,进行被动液气交换以吸出残余的硅油。结果。术后,所有患者在裂隙灯检查和B超检查中分别具有清晰的前房和玻璃体腔。硅油去除和整个手术的平均时间分别为8.0±1.4分钟和12.4±2.5分钟。术后1天、3天、1周、1个月和3个月的平均眼压分别为9.0±5.8mmHg、11.3±7.6mmHg、16.1±6.9mmHg、17.7±4.8mmHg和17.1±3.5mmHg。结论。这种新方法可能提供一种安全、快速的去除硅油的方法。