MOA Key Laboratory of Agricultural Information Acquisition Technology (Beijing), China Agricultural University, Beijing, China.
State Key Laboratory of Food Science and Technology, Nanchang University, Nanchang, China.
Biosens Bioelectron. 2016 Dec 15;86:770-776. doi: 10.1016/j.bios.2016.07.071. Epub 2016 Jul 22.
Early screening of pathogenic bacteria is a key to prevent and control of foodborne diseases. In this study, we developed a fast and sensitive bacteria detection method integrating electrochemical impedance analysis, urease catalysis with microfluidics and using Listeria as model. The Listeria cells, the anti-Listeria monoclonal antibodies modified magnetic nanoparticles (MNPs), and the anti-Listeria polyclonal antibodies and urease modified gold nanoparticles (AuNPs) were incubated in a fluidic separation chip with active mixing to form the MNP-Listeria-AuNP-urease sandwich complexes. The complexes were captured in the separation chip by applying a high gradient magnetic field, and the urea was injected to resuspend the complexes and hydrolyzed under the catalysis of the urease on the complexes into ammonium ions and carbonate ions, which were transported into a microfluidic detection chip with an interdigitated microelectrode for impedance measurement to determine the amount of the Listeria cells. The capture efficiency of the Listeria cells in the separation chip was ∼93% with a shorter time of 30min due to the faster immuno-reaction using the active magnetic mixing. The changes on both impedance magnitude and phase angle were demonstrated to be able to detect the Listeria cells as low as 1.6×10(2)CFU/mL. The detection time was reduced from original ∼2h to current ∼1h. The recoveries of the spiked lettuce samples ranged from 82.1% to 89.6%, indicating the applicability of this proposed biosensor. This microfluidic impedance biosensor has shown the potential for online, automatic and sensitive bacteria separation and detection.
早期的病原菌筛选是预防和控制食源性疾病的关键。在本研究中,我们开发了一种快速灵敏的细菌检测方法,该方法将电化学阻抗分析、脲酶催化与微流控技术相结合,以李斯特菌为模型。李斯特菌细胞、抗李斯特菌单克隆抗体修饰的磁性纳米颗粒(MNPs)、抗李斯特菌多克隆抗体和脲酶修饰的金纳米颗粒(AuNPs)在具有主动混合功能的微流分离芯片中孵育,形成 MNPs-李斯特菌-AuNPs-脲酶三明治复合物。通过施加高梯度磁场将复合物捕获在分离芯片中,然后注入尿素以重新悬浮复合物,并在复合物上的脲酶的催化作用下将其水解成铵离子和碳酸根离子,这些离子被运送到具有叉指微电极的微流检测芯片中进行阻抗测量,以确定李斯特菌细胞的数量。由于使用主动磁混合可以更快地进行免疫反应,因此分离芯片中李斯特菌细胞的捕获效率约为 93%,检测时间也缩短到 30min。阻抗幅度和相位角的变化均表明,该方法能够检测低至 1.6×10(2)CFU/mL 的李斯特菌细胞。检测时间从原来的约 2h 缩短到目前的约 1h。添加到生菜样品中的李斯特菌的回收率在 82.1%到 89.6%之间,表明了该生物传感器的适用性。这种微流阻抗生物传感器具有在线、自动和灵敏细菌分离和检测的潜力。