Carli Alberto V, Warth Lucian C, de Mesy Bentley Karen L, Nestor Bryan J
Department of Orthopaedic Surgery, Hospital for Special Surgery, New York, New York.
Department of Pathology and Laboratory Medicine, University of Rochester Medical Center, Rochester, New York.
J Arthroplasty. 2017 Feb;32(2):463-469. doi: 10.1016/j.arth.2016.07.024. Epub 2016 Aug 8.
Several acetabular components utilizing novel ultraporous metal substrates have been introduced over the past decade. Collectively by design, they have a lower modulus of elasticity to reduce stress shielding, a higher coefficient of friction to enhance interference fit, and ultraporous surfaces to enhance osseointegration. However, little literature exists regarding their clinical performance.
This study compared the clinical and radiographic results of 109 hips in 95 patients using a Tritanium primary cup (Stryker, Mahwah, NJ) to an age, body mass index, and gender-matched cohort of 100 patients that received a contemporary cup (Stryker Trident PSL HA).
At an average 4.24 + 1.49 years, implant survivorship of the Tritanium primary cup was 98.2%, with 2 cups revised for failure of osseointegration. One-year radiographs revealed radiolucent and radiosclerotic lines in 2 or more DeLee zones in 30.3% of cups and 3 zone involvement in 8.2%. These proportions increased (40.0% and 17.1%, respectively) at minimum 5-year follow-up. A comparison of 1 year and last follow-up radiographs revealed progression in 13.8%. Tritanium primary components with radiolucency in 2 or more zones exhibited significantly lower HHS at 2 years compared to all Trident peripheral self-locking (PSL) components (P < .0001) and Tritanium primary components with 1 zone or no radiolucency (P = .026). Scanning electron microscopy of a retrieved cup revealed local inflammatory reaction and no evidence of osseointegration.
Despite adequate implant survivorship, over one third of Tritanium primary cups had 2 or more zone radiolucency at minimum 5-year follow-up with associated lower Harris hip scores.
在过去十年中,已经推出了几种采用新型超多孔金属基板的髋臼组件。从设计上来说,它们共同具有较低的弹性模量以减少应力遮挡,较高的摩擦系数以增强干涉配合,以及超多孔表面以增强骨整合。然而,关于它们临床性能的文献很少。
本研究将95例患者的109髋使用Tritanium初次髋臼杯(史赛克公司,新泽西州马霍瓦)的临床和影像学结果,与100例年龄、体重指数和性别匹配且接受当代髋臼杯(史赛克Trident PSL HA)的队列进行了比较。
平均随访4.24 ± 1.49年时,Tritanium初次髋臼杯的植入物生存率为98.2%,有2个髋臼杯因骨整合失败而翻修。1年时的X线片显示,30.3%的髋臼杯在2个或更多DeLee分区出现透亮线和硬化线,8.2%的髋臼杯有3个分区受累。在至少5年的随访中,这些比例有所增加(分别为40.0%和17.1%)。1年和最后随访时的X线片比较显示,13.8%有进展。与所有Trident周边自锁(PSL)组件相比,2个或更多分区出现透亮线的Tritanium初次组件在2年时的髋关节Harris评分显著更低(P < .0001),与1个分区或无透亮线的Tritanium初次组件相比也更低(P = .026)。对一个取出的髋臼杯进行扫描电子显微镜检查显示有局部炎症反应,且无骨整合迹象。
尽管植入物生存率足够,但在至少5年的随访中,超过三分之一的Tritanium初次髋臼杯有2个或更多分区的透亮线,且Harris髋关节评分较低。