Suppr超能文献

使用锥形束计算机断层扫描(CBCT)和根尖片对人工模拟模型上裂纹范围的研究

The Extent of the Crack on Artificial Simulation Models with CBCT and Periapical Radiography.

作者信息

Wang Shuang, Xu Yiran, Shen Zhengyan, Wang Lijun, Qiao Feng, Zhang Xu, Li Minghua, Wu Ligeng

机构信息

Department of Endodontics, School of Stomatology, Tianjin Medical University, Tianjin, China.

Department of Endodontics, Stomatological Hospital of Yantai, Shandong, China.

出版信息

PLoS One. 2017 Jan 4;12(1):e0169150. doi: 10.1371/journal.pone.0169150. eCollection 2017.

Abstract

BACKGROUND

The aim of this study was to investigate the extent of the crack of a cracked tooth on an artificial simulation model with Periapical Radiography (PR) and cone beam computed tomography (CBCT) in vitro, providing the basis for early diagnosis and an appropriate treatment plan.

METHODS

Forty-four teeth with different extents of artificial cracks, created by exposure to liquid nitrogen after hot water at 100°C, were collected. They were subjected to PR and CBCT. Micro-computed tomography (micro-CT) examination, regarded as a relatively more accurate measurement than others, was used to measure and record the crack depth. Three observers, an endodontic graduate student, an experienced endodontist, and an experienced radiologist, examined the PR and CBCT results independently, and the presence or absence of cracks with PR and CBCT were respectively recorded. The external consistency ICC with 95% confidence interval (95% CI) was used to analyze the consistency among the graduate student, endodontist, and radiologist; ROC curves were used for the analysis of diagnostic performance of both radiographic modalities for tooth cracks with crack depth.

RESULTS

For the interpretation of the PR results, there were statistically significant differences among the three different observers (P < 0.001), and the interpretation of the CBCT results (P < 0.001). In the group of results read by the graduate student, the sensitivity of diagnosis with CBCT and PR was 77.27% and 22.73%, respectively (P < 0.001). In the group of results read by the endodontist, the sensitivity of diagnosis with CBCT and PR was 81.81% and 8.19%, respectively (P < 0.001). In the group of results read by the radiologist, the sensitivity of diagnosis with CBCT and PR was 88.64% and 11.36%, respectively (P < 0.001). As for CBCT diagnosis, the critical value for the graduate, endodontist, and radiologist was 3.20 mm, 2.06 mm, and 1.24 mm, respectively. For the PR diagnosis, the critical value for the graduate, endodontist, and radiologist was 6.12 mm, 6.94 mm, and 6.94 mm, respectively.

CONCLUSIONS

Within the limitations of this study, on an artificial simulation model of cracked teeth for early diagnosis, we recommend that it would be better for a cracked tooth to be diagnosed by a radiologist with CBCT than PR, CBCT with a minimum depth of 1.24 mm.

摘要

背景

本研究旨在通过体外根尖片(PR)和锥形束计算机断层扫描(CBCT),在人工模拟模型上研究牙隐裂的程度,为早期诊断和制定合适的治疗方案提供依据。

方法

收集44颗经100°C热水处理后再暴露于液氮中形成不同程度人工裂纹的牙齿。对其进行PR和CBCT检查。微计算机断层扫描(micro-CT)检查被认为是比其他方法更准确的测量方法,用于测量和记录裂纹深度。三名观察者,一名牙髓病学研究生、一名经验丰富的牙髓病医生和一名经验丰富的放射科医生,独立检查PR和CBCT结果,并分别记录PR和CBCT下裂纹的有无。采用95%置信区间(95%CI)的组内相关系数(ICC)分析研究生、牙髓病医生和放射科医生之间的一致性;ROC曲线用于分析两种影像学检查方法对不同裂纹深度牙隐裂的诊断性能。

结果

对于PR结果的判读,三位不同观察者之间存在统计学显著差异(P<0.001),CBCT结果的判读也存在统计学显著差异(P<0.001)。在研究生阅读的结果组中,CBCT和PR诊断的敏感性分别为77.27%和22.73%(P<0.001)。在牙髓病医生阅读的结果组中,CBCT和PR诊断的敏感性分别为81.81%和8.19%(P<0.001)。在放射科医生阅读的结果组中,CBCT和PR诊断的敏感性分别为88.64%和11.36%(P<0.001)。对于CBCT诊断,研究生、牙髓病医生和放射科医生的临界值分别为3.20mm、2.06mm和1.24mm。对于PR诊断,研究生、牙髓病医生和放射科医生的临界值分别为6.12mm、6.94mm和6.94mm。

结论

在本研究的局限性内,在牙隐裂的人工模拟模型上进行早期诊断时,我们建议由放射科医生使用CBCT诊断牙隐裂比PR更好,CBCT的最小深度为1.24mm。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/eeca/5215233/726a6ded8c12/pone.0169150.g001.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验