Dörsam Stefan, Kirchhoff Jennifer, Bigalke Michael, Dahmen Nicolaus, Syldatk Christoph, Ochsenreither Katrin
Technical Biology, Institute of Process Engineering in Life Sciences, Karlsruhe Institute of Technology (KIT) Karlsruhe, Germany.
Thermochemical Conversation of Biomass, Institute of Catalysis Research and Technology, Karlsruhe Institute of Technology (KIT) Karlsruhe, Germany.
Front Microbiol. 2016 Dec 22;7:2059. doi: 10.3389/fmicb.2016.02059. eCollection 2016.
Pyrolysis oil, a complex mixture of several organic compounds, produced during flash pyrolysis of organic lignocellulosic material was evaluated for its suitability as alternative carbon source for fungal growth and fermentation processes. Therefore several fungi from all phyla were screened for their tolerance toward pyrolysis oil. Additionally and , both established organic acid producers, were chosen as model organisms to investigate the suitability of pyrolysis oil as carbon source in fungal production processes. It was observed that tolerates pyrolysis oil concentrations between 1 and 2% depending on growth phase or stationary production phase, respectively. To investigate possible reasons for the low tolerance level, eleven substances from pyrolysis oil including aldehydes, organic acids, small organic compounds and phenolic substances were selected and maximum concentrations still allowing growth and organic acid production were determined. Furthermore, effects of substances to malic acid production were analyzed and compounds were categorized regarding their properties in three groups of toxicity. To validate the results, further tests were also performed with . For the first time it could be shown that small amounts of phenolic substances are beneficial for organic acid production and might be able to degrade isoeugenol. Regarding pyrolysis oil toxicity, 2-cyclopenten-1-on was identified as the most toxic compound for filamentous fungi; a substance never described for anti-fungal or any other toxic properties before and possibly responsible for the low fungal tolerance levels toward pyrolysis oil.
热解油是有机木质纤维素材料闪速热解过程中产生的几种有机化合物的复杂混合物,对其作为真菌生长和发酵过程替代碳源的适用性进行了评估。因此,对所有门的几种真菌进行了热解油耐受性筛选。此外,还选择了两种成熟的有机酸生产者作为模式生物,以研究热解油作为真菌生产过程中碳源的适用性。据观察,根据生长阶段或静止生产阶段的不同,[具体真菌名称]分别能耐受1%至2%的热解油浓度。为了研究耐受性水平低的可能原因,从热解油中选择了11种物质,包括醛类、有机酸、小分子有机化合物和酚类物质,并确定了仍能允许生长和产生有机酸的最大浓度。此外,分析了这些物质对苹果酸生产的影响,并根据其性质将化合物分为三类毒性。为了验证结果,还对[具体真菌名称]进行了进一步测试。首次发现少量酚类物质有利于有机酸生产,[具体真菌名称]可能能够降解异丁香酚。关于热解油毒性,2-环戊烯-1-酮被确定为对丝状真菌毒性最大的化合物;这是一种以前从未描述过具有抗真菌或任何其他毒性特性的物质,可能是导致真菌对热解油耐受性低的原因。