Obst Steven J, Barber Lee, Miller Ashton, Barrett Rod S
1 The University of Queensland.
2 Central Queensland University.
J Appl Biomech. 2017 Aug;33(4):300-304. doi: 10.1123/jab.2016-0261. Epub 2017 Sep 7.
This study investigated reliability of freehand three-dimensional ultrasound (3DUS) measurement of in vivo human Achilles tendon (AT) moment arm. Sixteen healthy adults were scanned on 2 separate occasions by a single investigator. 3DUS scans were performed over the free AT, medial malleolus, and lateral malleolus with the ankle passively positioned in maximal dorsiflexion, mid dorsiflexion, neutral, mid plantar flexion and maximal plantar flexion. 3D reconstructions of the AT, medial malleolus, and lateral malleolus were created from manual segmentation of the ultrasound images and used to geometrically determine the AT moment arm using both a straight (straight AT) and curved (curved AT) tendon line-of-action. Both methods were reliable within- and between-session (intra-class correlation coefficients > 0.92; coefficient of variation < 2.5 %) and revealed that AT moment arm increased by ∼ 7 mm from maximal dorsiflexion (∼ 41mm) to maximal plantar flexion (∼ 48 mm). Failing to account for tendon curvature led to a small overestimation (< 2 mm) of AT moment arm that was most pronounced in ankle plantar flexion, but was less than the minimal detectable change of the method and could be disregarded.
本研究调查了徒手三维超声(3DUS)测量活体人跟腱(AT)力臂的可靠性。由一名研究人员在两个不同时间对16名健康成年人进行扫描。在踝关节被动置于最大背屈、中度背屈、中立位、中度跖屈和最大跖屈时,对游离的跟腱、内踝和外踝进行3DUS扫描。通过对超声图像进行手动分割,创建跟腱、内踝和外踝的3D重建,并使用直线(直线跟腱)和曲线(曲线跟腱)肌腱作用线从几何上确定跟腱力臂。两种方法在组内和组间均具有可靠性(组内相关系数>0.92;变异系数<2.5%),结果显示,跟腱力臂从最大背屈(约41mm)到最大跖屈(约48mm)增加了约7mm。未考虑肌腱曲率会导致跟腱力臂出现小幅度高估(<2mm),这在踝关节跖屈时最为明显,但小于该方法的最小可检测变化,可忽略不计。