College of Medicine, Konyang University, Boston, MA.
Department of Orthopedic Surgery, Emory University, Atlanta, GA.
Spine (Phila Pa 1976). 2017 Sep 15;42(18):E1050-E1057. doi: 10.1097/BRS.0000000000002067.
Prospective clinical pilot study.
To confirm the accuracy of thoracic pedicle screw placement by using the unilateral spinous noncovering hook type patient-specific drill template (PSDT) made through rapid prototyping (RP) and to analyze previously reported PSDT designs and their characteristics.
Pedicle screw fixation is the most common form of the posterior instrumentation of the thoracic and lumbar spine. Various techniques have been introduced to improve pedicle screw placement. Among them PSDT with a preplanned trajectory has been considered a promising solution; however, we don't have consensus on proper character of the template.
Preoperative spiral three-dimensional (3D) computed tomography (CT) was performed on the thoracic spine. The images were stored in DICOM format and transferred to a workstation running MIMICS 17.0 software to generate a 3D reconstruction template for the desired thoracic vertebra. The accurate trajectory and screw diameter and length were calculated with UG Imageware 12.1. The guide template was sterilized and used intraoperatively to assist with the placement of thoracic pedicle screws. After all pedicle trajectory screws had been inserted. We reviewed 12 previous reports and classified them according to the shape and system of PSDT that met the inclusion criteria of the review.
Ten screws were placed by using the PSDT without violating the single laminar cortex. There was no violation of the spinal canal or the cortex of pedicle on postoperative CT scans. The results of 13 PSDT types included in the current study suggested that there is no significant difference in accuracy between the PSDTs.
The unilateral spinous process noncovering hook type PSDT made through RP provided an accurate trajectory for the thoracic vertebra, and the classification of PSDT in this study could be helpful for further studies.
前瞻性临床试点研究。
通过使用通过快速原型制作(RP)制成的单侧棘突非覆盖钩型患者特异性钻头模板(PSDT)来确认胸椎椎弓根螺钉放置的准确性,并分析先前报道的 PSDT 设计及其特征。
椎弓根螺钉固定是胸腰椎后器械固定最常见的形式。已经引入了各种技术来改善椎弓根螺钉的放置。其中,具有预定轨迹的 PSDT 被认为是一种有前途的解决方案,但是我们对模板的适当特征尚无共识。
对胸椎进行术前螺旋三维(3D)计算机断层扫描(CT)。将图像以 DICOM 格式存储,并传输到运行 MIMICS 17.0 软件的工作站,以生成所需胸椎的 3D 重建模板。使用 UG Imageware 12.1 计算准确的轨迹以及螺钉直径和长度。将导板消毒并在手术中用于辅助放置胸椎椎弓根螺钉。在插入所有椎弓根轨迹螺钉后,我们回顾了 12 篇先前的报告,并根据符合综述纳入标准的 PSDT 的形状和系统对其进行了分类。
使用 PSDT 放置了 10 个螺钉,而没有违反单个板层皮质。术后 CT 扫描未见椎管或椎弓根皮质侵犯。当前研究中包括的 13 种 PSDT 类型的结果表明,PSDT 的准确性没有明显差异。
通过 RP 制成的单侧棘突非覆盖钩型 PSDT 为胸椎提供了准确的轨迹,本研究中的 PSDT 分类可能有助于进一步研究。
5。