Department of Materials Science and Engineering, Jinan University , Guangzhou 510632, China.
IBS Center for Soft and Living Matter and UNIST, Ulsan 689-798, South Korea.
ACS Nano. 2017 Jan 24;11(1):204-212. doi: 10.1021/acsnano.6b04468. Epub 2016 Dec 8.
We characterize the porosity of hydrogels by imaging the displacement trajectories of embedded tracer particles. This offers the possibility of characterizing the size and projected shape of individual pores as well as direct, real-space maps of heterogeneous porosity and its distribution. The scheme shows that when fluorescent spherical particles treated to avoid specific adsorption are loaded into the gel, their displacement trajectories from Brownian motion report on the size and projected shape in which the pore resides, convoluted by the particle size. Of special interest is how pores and their distribution respond to stimuli. These ideas are validated in agarose gels loaded with latex particles stabilized by adsorbed bovine serum albumin. Gels heated from room temperature produced an increasingly more monodisperse pore size distribution because increasing temperature preferentially enlarges smaller pores, but this was irreversible upon cooling, and shearing agarose gels beyond the yield point destroyed larger pores preferably. The method is considered to be generalizable beyond the agarose system presented here as proof of concept.
我们通过对嵌入示踪粒子的位移轨迹成像来描述水凝胶的孔隙率。这使得我们有可能对单个孔的大小和投影形状以及不均匀孔隙率及其分布的直接、实空间图谱进行特征描述。该方案表明,当将经过处理以避免特定吸附的荧光球形粒子装入凝胶中时,它们的由布朗运动引起的位移轨迹报告了孔所在的大小和投影形状,该形状被粒子尺寸所卷积。特别有趣的是,多孔及其分布如何响应刺激。这些想法在负载有通过吸附牛血清白蛋白稳定的乳胶粒子的琼脂糖凝胶中得到了验证。从室温加热凝胶会产生越来越单分散的孔径分布,因为升高温度会优先增大较小的孔,但冷却后这种情况是不可逆的,并且超过屈服点剪切琼脂糖凝胶会优先破坏较大的孔。该方法被认为可推广到此处呈现的琼脂糖体系之外,作为概念验证。