Department of Physics and Astronomy, ‡Department of Molecular Biology and Biotechnology, §Department of Chemistry, and ∥Krebs Institute, University of Sheffield , Sheffield, South Yorkshire S10 2TN, U.K.
ACS Nano. 2017 Jan 24;11(1):126-133. doi: 10.1021/acsnano.6b05647. Epub 2016 Nov 21.
The function of bioenergetic membranes is strongly influenced by the spatial arrangement of their constituent membrane proteins. Atomic force microscopy (AFM) can be used to probe protein organization at high resolution, allowing individual proteins to be identified. However, previous AFM studies of biological membranes have typically required that curved membranes are ruptured and flattened during sample preparation, with the possibility of disruption of the native protein arrangement or loss of proteins. Imaging native, curved membranes requires minimal tip-sample interaction in both lateral and vertical directions. Here, long-range tip-sample interactions are reduced by optimizing the imaging buffer. Tapping mode AFM with high-resonance-frequency small and soft cantilevers, in combination with a high-speed AFM, reduces the forces due to feedback error and enables application of an average imaging force of tens of piconewtons. Using this approach, we have imaged the membrane organization of intact vesicular bacterial photosynthetic "organelles", chromatophores. Despite the highly curved nature of the chromatophore membrane and lack of direct support, the resolution was sufficient to identify the photosystem complexes and quantify their arrangement in the native state. Successive imaging showed the proteins remain surprisingly static, with minimal rotation or translation over several-minute time scales. High-order assemblies of RC-LH1-PufX complexes are observed, and intact ATPases are successfully imaged. The methods developed here are likely to be applicable to a broad range of protein-rich vesicles or curved membrane systems, which are an almost ubiquitous feature of native organelles.
生物能量膜的功能受到其组成膜蛋白的空间排列的强烈影响。原子力显微镜(AFM)可用于以高分辨率探测蛋白质的组织,从而能够识别单个蛋白质。然而,以前对生物膜的 AFM 研究通常需要在样品制备过程中使弯曲的膜破裂和平整化,这有可能破坏天然蛋白质的排列或导致蛋白质丢失。对天然弯曲膜的成像需要在横向和纵向两个方向上最小化针尖-样品的相互作用。在这里,通过优化成像缓冲液来减少长程针尖-样品相互作用。采用高共振频率的小而软的悬臂和高速 AFM 的轻敲模式 AFM,可以减少由于反馈误差引起的力,并能够施加数十皮牛顿的平均成像力。使用这种方法,我们已经对完整的囊泡细菌光合“细胞器”类囊体的膜组织进行了成像。尽管类囊体膜具有高度弯曲的性质且缺乏直接的支撑,但分辨率足以识别光系统复合物,并在天然状态下对其排列进行定量。连续成像显示,这些蛋白质仍然出人意料地静止,在几分钟的时间尺度内,只有最小的旋转或平移。观察到 RC-LH1-PufX 复合物的高级组装,并且成功地对完整的 ATP 酶进行了成像。这里开发的方法可能适用于广泛的富含蛋白质的囊泡或弯曲的膜系统,这些系统是天然细胞器的几乎普遍特征。