Jessop David M, Pain Matthew T G
1School of Sport, Exercise and Social Science, Southampton Solent University, East Park Terrace, Southampton, UK.
2School of Sport, Exercise and Health Sciences, Loughborough University, Ashby Road, Loughborough, UK.
J Hum Kinet. 2016 Apr 13;50:37-44. doi: 10.1515/hukin-2015-0139. eCollection 2016 Apr 1.
Speed of movement is fundamental to the outcome of many human actions. A variety of techniques can be implemented in order to maximise movement speed depending on the goal of the movement, constraints, and the time available. Knowing maximum movement velocities is therefore useful for developing movement strategies but also as input into muscle models. The aim of this study was to determine maximum flexion and extension velocities about the major joints in upper and lower limbs. Seven university to international level male competitors performed flexion/extension at each of the major joints in the upper and lower limbs under three conditions: isolated; isolated with a countermovement; involvement of proximal segments. 500 Hz planar high speed video was used to calculate velocities. The highest angular velocities in the upper and lower limb were 50.0 rad·s-1 and 28.4 rad·s-1, at the wrist and knee, respectively. As was true for most joints, these were achieved with the involvement of proximal segments, however, ANOVA analysis showed few significant differences (p<0.05) between conditions. Different segment masses, structures and locations produced differing results, in the upper and lower limbs, highlighting the requirement of segment specific strategies for maximal movements.
运动速度是许多人类动作结果的基础。根据运动目标、限制因素和可用时间,可以采用多种技术来最大限度地提高运动速度。因此,了解最大运动速度不仅有助于制定运动策略,还能为肌肉模型提供输入。本研究的目的是确定上肢和下肢主要关节的最大屈伸速度。七名大学至国际水平的男性运动员在三种条件下对上肢和下肢的每个主要关节进行屈伸:孤立动作;有反向动作的孤立动作;近端节段参与。使用500Hz的平面高速视频来计算速度。上肢和下肢的最高角速度分别为50.0弧度·秒⁻¹和28.4弧度·秒⁻¹,分别出现在腕关节和膝关节处。对于大多数关节来说,这些都是在近端节段参与的情况下实现的,然而,方差分析显示不同条件之间几乎没有显著差异(p<0.05)。不同的节段质量、结构和位置在上肢和下肢产生了不同的结果,突出了针对最大运动制定节段特定策略的必要性。