Sensini Alberto, Gualandi Chiara, Cristofolini Luca, Tozzi Gianluca, Dicarlo Manuela, Teti Gabriella, Mattioli-Belmonte Monica, Letizia Focarete Maria
Department of Industrial Engineering, Alma Mater Studiorum-University of Bologna, I-40131 Bologna, Italy.
Biofabrication. 2017 Mar 8;9(1):015025. doi: 10.1088/1758-5090/aa6204.
Electrospinning is a promising technique for the production of scaffolds aimed at the regeneration of soft tissues. The aim of this work was to develop electrospun bundles mimicking the architecture and mechanical properties of the fascicles of the human Achille tendon. Two different blends of poly(L-lactic acid) (PLLA) and collagen (Coll) were tested, PLLA/Coll-75/25 and PLLA/Coll-50/50, and compared with bundles of pure PLLA. First, a complete physico-chemical characterization was performed on non-woven mats made of randomly arranged fibers. The presence of collagen in the fibers was assessed by thermogravimetric analysis, differential scanning calorimetry and water contact angle measurements. The collagen release in phosphate buffer solution (PBS) was evaluated for 14 days: results showed that collagen loss was about 50% for PLLA/Coll-75/25 and 70% for PLLA/Coll-50/50. In the bundles, the individual fibers had a diameter of 0.48 ± 0.14 μm (PLLA), 0.31 ± 0.09 μm (PLLA/Coll-75/25), 0.33 ± 0.08 μm (PLLA/Coll-50/50), whereas bundle diameter was in the range 300-500 μm for all samples. Monotonic tensile tests were performed to measure the mechanical properties of PLLA bundles (as-spun) and of PLLA/Coll-75/25 and PLLA/Coll-50/50 bundles (as-spun, and after 48 h, 7 days and 14 days in PBS). The most promising material was the PLLA/Coll-75/25 blend with a Young modulus of 98.6 ± 12.4 MPa (as-spun) and 205.1 ± 73.0 MPa (after 14 days in PBS). Its failure stress was 14.2 ± 0.7 MPa (as-spun) and 6.8 ± 0.6 MPa (after 14 days in PBS). Pure PLLA withstood slightly lower stress than the PLLA/Coll-75/25 while PLLA/Coll-50/50 had a brittle behavior. Human-derived tenocytes were used for cellular tests. A good cell adhesion and viability after 14 day culture was observed. This study has therefore demonstrated the feasibility of fabricating electrospun bundles with multiscale structure and mechanical properties similar to the human tendon.
静电纺丝是一种很有前景的技术,可用于生产旨在促进软组织再生的支架。这项工作的目的是开发模仿人类跟腱束结构和力学性能的静电纺丝束。测试了聚(L-乳酸)(PLLA)和胶原蛋白(Coll)的两种不同混合物,即PLLA/Coll-75/25和PLLA/Coll-50/50,并与纯PLLA束进行比较。首先,对由随机排列的纤维制成的非织造垫进行了完整的物理化学表征。通过热重分析、差示扫描量热法和水接触角测量来评估纤维中胶原蛋白的存在。评估了在磷酸盐缓冲溶液(PBS)中14天的胶原蛋白释放情况:结果表明,PLLA/Coll-75/25的胶原蛋白损失约为50%,PLLA/Coll-50/50的胶原蛋白损失约为70%。在这些束中,单根纤维的直径为0.48±0.14μm(PLLA)、0.31±0.09μm(PLLA/Coll-75/25)、0.33±0.08μm(PLLA/Coll-50/50),而所有样品的束直径在300-500μm范围内。进行了单调拉伸试验以测量PLLA束(纺出时)以及PLLA/Coll-75/25和PLLA/Coll-50/50束(纺出时以及在PBS中48小时、7天和14天后)的力学性能。最有前景的材料是PLLA/Coll-75/25混合物,其杨氏模量为98.6±12.4MPa(纺出时)和205.1±73.0MPa(在PBS中14天后)。其断裂应力为14.2±0.7MPa(纺出时)和6.8±0.6MPa(在PBS中14天后)。纯PLLA承受的应力略低于PLLA/Coll-75/25,而PLLA/Coll-50/50表现出脆性。使用人源肌腱细胞进行细胞测试。在14天培养后观察到良好的细胞粘附和活力。因此,这项研究证明了制造具有与人类肌腱相似的多尺度结构和力学性能的静电纺丝束的可行性。