[Studies on dental self-curing resins. (17). Adhesion of PMMA with bovine enamel or dental alloys (author's transl)].

We synthesized 4-methacryloxyethyl trimellite acid (4-MET) and anhydride (4-META), and tried them as a reactive comonomer for adhesives to bovine enamel. In the case of non-etched enamel, tensile adhesive strength was 40-50 Kg/cm2 after one day immersion in 37 degrees C water, but it decreased below 10 Kg/cm2 after a month immersion in 37 degrees C water. It could be concluded that this adhesion was not sufficient for practical usage. Then we applied this method to an etched enamel. After a series of experiments we concluded that it was necessary to etch bovine enamel surface with 30% citric acid for practical usage. Adhesion of some dental alloys with a PMMA rod was also studied and adhesive strength in Co-Cr alloy was over 150 Kg/cm2 either after one month immersion in 37 degrees C water or 60 times thermal cycles between 4 degrees C and 60 degrees C.