Hanif Muhammad, Zaman Muhammad
Department of Pharmacy, Bahauddin Zakariya University, Multan, 60800, Pakistan.
Daru. 2017 Mar 20;25(1):6. doi: 10.1186/s40199-017-0172-2.
Mucoadhesion is an important property that helps oral drug delivery system to remain attached with buccal mucosa and hence to improve the delivery of the drug. The current study was designed to achieve the thiol modification of Arabinoxylan (ARX) and to develop a mucoadhesive oral film for the improved delivery of tizanidine hydrochloride (TZN HCl).
Synthesis of thiolated arabinoxylan (TARX) was accomplished by esterification of ARX with thioglycolic acid (TGA). TARX was further used for the development of mucoadhesive oral films which were prepared by using a solvent casting technique. Formulation of the films was designed and optimized by using central composite design (CCRD), selecting TARX (X) and glycerol (X) as variables. Prepared film formulations were evaluated for mechanical strength, ex-vivo mucoadhesion, in-vitro drug release, ex-vivo drug permeation, surface morphology and drug contents.
Thiolation of ARX was confirmed by fourier transform infra-red spectroscopy (FTIR) as a peak related to thiol group appeared at 2516 cm. The claim of successful thiolation of ARX was strengthened by the presence of 2809.003 ± 1.03 μmoles of thiol contents per gram of the polymer, which was determined by Ellman's reagent method. From the results, it was observed that the films were of satisfactory mechanical strength and mucoadhesiveness with folding endurance greater than 300 and mucoadhesive strength 11.53 ± 0.17 N, respectively. Reasonable drug retention was observed during in-vitro dissolution (85.03% cumulative drug release) and ex-vivo permeation (78.90% cumulative amount of permeated drug) studies conducted for 8 h. Effects of varying concentrations of both polymer and plasticizer on prepared mucoadhesive oral films were evaluated by ANOVA and it was observed that glycerol can enhanced the dissolution as well as permeation of the drug while TARX has opposite impact on these parameters.
In nutshell, TARX in combination with glycerolwas found to be suitable for the development of controlled release mucoadhesive oral films of TZN HCl. Schematic diagram showing conversion of ARX to TARX, TARX to oral film and evaluation of fabricated oral film.
粘膜粘附是一项重要特性,有助于口服给药系统附着于颊粘膜,从而提高药物递送效果。本研究旨在实现阿拉伯木聚糖(ARX)的硫醇化修饰,并开发一种用于改善盐酸替扎尼定(TZN HCl)递送的粘膜粘附口腔膜。
通过ARX与巯基乙酸(TGA)的酯化反应完成硫醇化阿拉伯木聚糖(TARX)的合成。TARX进一步用于开发粘膜粘附口腔膜,采用溶剂浇铸技术制备。通过中心复合设计(CCRD)设计并优化膜的配方,选择TARX(X)和甘油(X)作为变量。对制备的膜制剂进行机械强度、体外粘膜粘附性、体外药物释放、体外药物渗透、表面形态和药物含量评估。
傅里叶变换红外光谱(FTIR)证实了ARX的硫醇化,因为在2516 cm处出现了一个与硫醇基团相关的峰。每克聚合物中存在2809.003±1.03微摩尔硫醇含量,通过埃尔曼试剂法测定,这进一步证明了ARX成功进行了硫醇化修饰。结果表明,这些膜具有令人满意的机械强度和粘膜粘附性,折叠耐力大于300,粘膜粘附强度为11.53±0.17 N。在8小时的体外溶出(累积药物释放85.03%)和体外渗透(累积渗透药物量78.90%)研究中观察到了合理的药物保留情况。通过方差分析评估了聚合物和增塑剂不同浓度对制备的粘膜粘附口腔膜的影响,结果表明甘油可增强药物的溶出和渗透,而TARX对这些参数有相反的影响。
简而言之,发现TARX与甘油结合适用于开发TZN HCl控释粘膜粘附口腔膜。展示ARX转化为TARX、TARX转化为口腔膜以及对制备的口腔膜进行评估的示意图。