Lin Kunning, Ma Jian, Yuan Dongxing, Feng Sichao, Su Haitao, Huang Yongming, Shangguan Qipei
State Key Laboratory of Marine Environmental Science, College of the Environment and Ecology, Xiamen University, Xiamen 361102, People's Republic of China.
State Key Laboratory of Marine Environmental Science, College of the Environment and Ecology, Xiamen University, Xiamen 361102, People's Republic of China.
Talanta. 2017 May 15;167:166-171. doi: 10.1016/j.talanta.2017.01.063. Epub 2017 Jan 27.
An integrated system was developed for automatic and sequential determination of NO, NO, PO, Fe, Fe and Mn in natural waters based on reverse flow injection analysis combined with spectrophotometric detection. The system operation was controlled by a single chip microcomputer and laboratory-programmed software written in LabVIEW. The experimental parameters for each nutrient element analysis were optimized based on a univariate experimental design, and interferences from common ions were evaluated. The upper limits of the linear range (along with detection limit, µmolL) of the proposed method was 20 (0.03), 200 (0.7), 12 (0.3), 5 (0.03), 5 (0.03), 9 (0.2) µmolL, for NO, NO, PO, Fe, Fe and Mn, respectively. The relative standard deviations were below 5% (n=9-13) and the recoveries varied from 88.0±1.0% to 104.5±1.0% for spiked water samples. The sample throughput was about 20h. This system has been successfully applied for the determination of multi-nutrient elements in different kinds of water samples and showed good agreement with reference methods (slope 1.0260±0.0043, R=0.9991, n=50).
