Suppr超能文献

溶胶-凝胶-水热法合成银-钛酸锶复合纳米颗粒

Synthesis of Silver-Strontium Titanate Hybrid Nanoparticles by Sol-Gel-Hydrothermal Method.

作者信息

Ueno Shintaro, Nakashima Kouichi, Sakamoto Yasunao, Wada Satoshi

机构信息

Graduate School Department of Interdisciplinary Research, University of Yamanashi, 4-4-37 Takeda, Kofu 400-8510, Japan.

出版信息

Nanomaterials (Basel). 2015 Mar 24;5(2):386-397. doi: 10.3390/nano5020386.

Abstract

Silver (Ag) nanoparticle-loaded strontium titanate (SrTiO₃) nanoparticles were attempted to be synthesized by a sol-gel-hydrothermal method. We prepared the titanium oxide precursor gels incorporated with Ag⁺ and Sr ions with various molar ratios, and they were successfully converted into the Ag-SrTiO₃ hybrid nanoparticles by the hydrothermal treatment at 230 °C in strontium hydroxide aqueous solutions. The morphology of the SrTiO₃ nanoparticles is dendritic in the presence and absence of Ag⁺ ions. The precursor gels, which act as the high reactive precursor, give rise to high nucleation and growth rates under the hydrothermal conditions, and the resultant diffusion-limited aggregation phenomena facilitate the dendritic growth of SrTiO₃. From the field-emission transmission electron microscope observation of these Ag-SrTiO₃ hybrid nanoparticles, the Ag nanoparticles with a size of a few tens of nanometers are distributed without severe agglomeration, owing to the competitive formation reactions of Ag and SrTiO₃.

摘要

尝试通过溶胶-凝胶-水热法合成负载银(Ag)的钛酸锶(SrTiO₃)纳米颗粒。我们制备了掺入不同摩尔比Ag⁺和Sr离子的氧化钛前驱体凝胶,并通过在氢氧化锶水溶液中于230℃进行水热处理,成功将它们转化为Ag-SrTiO₃杂化纳米颗粒。在有和没有Ag⁺离子的情况下,SrTiO₃纳米颗粒的形态均为树枝状。作为高反应性前驱体的前驱体凝胶,在水热条件下产生高成核率和生长速率,并且由此产生的扩散限制聚集现象促进了SrTiO₃的树枝状生长。从这些Ag-SrTiO₃杂化纳米颗粒的场发射透射电子显微镜观察结果来看,由于Ag和SrTiO₃的竞争形成反应,尺寸为几十纳米的Ag纳米颗粒分布均匀,没有严重团聚。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/707a/5312905/99c577b0cbc8/nanomaterials-05-00386-g001.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验