Pandey Prem C, Pandey Govind, Narayan Roger J
Department of Chemistry, Indian Institute of Technology (BHU), Varanasi 221005, India.
BRD Medical College, Gorakhpur 273013, India.
Biointerphases. 2017 Mar 27;12(1):011005. doi: 10.1116/1.4979200.
Mesoporous silica nanoparticles (MSNPs) have been used as an efficient and safe carrier for drug delivery and biocatalysis. The surface modification of MSNPs using suitable reagents may provide a robust framework in which two or more components can be incorporated to give multifunctional capabilities (e.g., synthesis of noble metal nanoparticles within mesoporous architecture along with loading of a bioactive molecule). In this study, the authors reported on a new synthetic route for the synthesis of gold nanoparticles (AuNPs) within (1) unmodified MSNPs and (2) 3-trihydroxysilylpropyl methylphosphonate-modified MSNPs. A cationic polymer, polyethylenimine (PEI), and formaldehyde were used to mediate synthetic incorporation of AuNPs within MSNPs. The AuNPs incorporated within the mesoporous matrix were characterized by transmission electron microscopy, energy dispersive x-ray analysis, and high-resolution scanning electron microscopy. PEI in the presence of formaldehyde enabled synthetic incorporation of AuNPs in both unmodified and modified MSNPs. The use of unmodified MSNPs was associated with an increase in the polycrystalline structure of the AuNPs within the MSNPs. The AuNPs within modified MSNPs showed better catalytic activity than those within unmodified MSNPs. MSNPs with an average size of 200 nm and with a pore size of 4-6 nm were used for synthetic insertion of AuNPs. It was found that the PEI coating enabled AuNPs synthesis within the mesopores in the presence of formaldehyde or tetrahydrofuran hydroperoxide at a temperature between 10 and 25 °C or at 60 °C in the absence of organic reducing agents. The as-made AuNP-inserted MSNPs exhibited enhanced catalytic activity. For example, these materials enabled rapid catalytic oxidation of the o-dianisidine substrate to produce a colored solution in proportion to the amount of HO generated as a function of glucose oxidase-catalyzed oxidation of glucose; a linear concentration range from 80 to 800 μM and a detection limit as low as 80 μM were observed. The mesoscale pores of the as developed AuNP-inserted MSNPs were also used to entrap the hydrophobic drug paclitaxel. The results of this study indicate the potential use of the AuNP-inserted MSNPs in biocatalysis and drug delivery.
介孔二氧化硅纳米颗粒(MSNPs)已被用作药物递送和生物催化的高效且安全的载体。使用合适的试剂对MSNPs进行表面修饰可以提供一个强大的框架,在其中可以掺入两种或更多种组分以赋予多功能能力(例如,在介孔结构内合成贵金属纳米颗粒以及负载生物活性分子)。在本研究中,作者报道了一种在(1)未修饰的MSNPs和(2)3 - 三羟基甲硅烷基丙基甲基膦酸酯修饰的MSNPs内合成金纳米颗粒(AuNPs)的新合成路线。使用阳离子聚合物聚乙烯亚胺(PEI)和甲醛来介导AuNPs在MSNPs内的合成掺入。通过透射电子显微镜、能量色散X射线分析和高分辨率扫描电子显微镜对掺入介孔基质内的AuNPs进行了表征。在甲醛存在下,PEI能够使AuNPs在未修饰和修饰的MSNPs中进行合成掺入。使用未修饰的MSNPs会使MSNPs内AuNPs的多晶结构增加。修饰后的MSNPs内的AuNPs比未修饰的MSNPs内的AuNPs表现出更好的催化活性。平均尺寸为200 nm且孔径为4 - 6 nm的MSNPs用于AuNPs的合成插入。研究发现,PEI涂层能够在甲醛或四氢呋喃过氧化氢存在下,于10至25°C的温度下或在60°C且不存在有机还原剂的情况下,在介孔内实现AuNPs的合成。所制备的插入AuNP的MSNPs表现出增强的催化活性。例如,这些材料能够快速催化邻联茴香胺底物氧化,产生与葡萄糖氧化酶催化葡萄糖氧化产生的HO量成比例的有色溶液;观察到线性浓度范围为80至800μM,检测限低至80μM。所开发的插入AuNP的MSNPs的介观孔还用于包封疏水性药物紫杉醇。本研究结果表明插入AuNP的MSNPs在生物催化和药物递送方面具有潜在用途。