Zhang Yucheng, Guerra-Nuñez Carlos, Utke Ivo, Michler Johann, Agrawal Piyush, Rossell Marta D, Erni Rolf
Electron Microscopy Center, Empa, Swiss Federal Laboratories for Materials Science and Technology , Überlandstrasse 129, CH-8600 Dübendorf, Switzerland.
Laboratory of Mechanics of Materials and Nanostructure, Empa, Swiss Federal Laboratories for Materials Science and Technology , Feuerwerkstrasse 39, CH-3602 Thun, Switzerland.
Chem Mater. 2017 Mar 14;29(5):2232-2238. doi: 10.1021/acs.chemmater.6b05143. Epub 2017 Feb 27.
Controlled synthesis of a hybrid nanomaterial based on titanium oxide and single-layer graphene (SLG) using atomic layer deposition (ALD) is reported here. The morphology and crystallinity of the oxide layer on SLG can be tuned mainly with the deposition temperature, achieving either a uniform amorphous layer at 60 °C or ∼2 nm individual nanocrystals on the SLG at 200 °C after only 20 ALD cycles. A continuous and uniform amorphous layer formed on the SLG after 180 cycles at 60 °C can be converted to a polycrystalline layer containing domains of anatase TiO after a postdeposition annealing at 400 °C under vacuum. Using aberration-corrected transmission electron microscopy (AC-TEM), characterization of the structure and chemistry was performed on an atomic scale and provided insight into understanding the nucleation and growth. AC-TEM imaging and electron energy loss spectroscopy revealed that rocksalt TiO nanocrystals were occasionally formed at the early stage of nucleation after only 20 ALD cycles. Understanding and controlling nucleation and growth of the hybrid nanomaterial are crucial to achieving novel properties and enhanced performance for a wide range of applications that exploit the synergetic functionalities of the ensemble.
本文报道了利用原子层沉积(ALD)技术可控合成基于二氧化钛和单层石墨烯(SLG)的杂化纳米材料。SLG上氧化层的形貌和结晶度主要可通过沉积温度进行调控,仅经过20个ALD循环后,在60℃时可形成均匀的非晶层,在200℃时可在SLG上形成约2nm的单个纳米晶体。在60℃经过180个循环后在SLG上形成的连续均匀非晶层,在400℃真空下进行沉积后退火后可转变为包含锐钛矿TiO畴的多晶层。使用像差校正透射电子显微镜(AC-TEM)在原子尺度上对结构和化学性质进行了表征,并为理解成核和生长提供了深入见解。AC-TEM成像和电子能量损失谱表明,仅经过20个ALD循环后,在成核早期偶尔会形成岩盐TiO纳米晶体。理解和控制杂化纳米材料的成核和生长对于实现利用该整体协同功能的广泛应用的新特性和增强性能至关重要。