Upendar Ganta, Dutta Susmita, Bhattacharya Pinaki, Dutta Abhishek
Department of Chemical Engineering, National Institute of Technology Durgapur, Durgapur 713209, India E-mail:
Department of Chemical Engineering, Heritage Institute of Technology Kolkata, Kolkata 700107, India.
Water Sci Technol. 2017 Apr;75(7-8):1572-1583. doi: 10.2166/wst.2017.031.
Methylene blue (MB) commonly found in the textile industry effluent has been chosen as a model dye to investigate bioremediation using Bacillus subtilis MTCC 441. Both free cells and calcium alginate immobilized cells have been used to remove MB from the effluent. The operating variables of initial concentration of dye (20-60 mg/L), inoculum size (4-8%) and temperature (25-35 °C) have been varied judiciously during the kinetic study in a batch contactor. A maximum removal of 91.68% is obtained when 20 mg/L MB solution was inoculated with 8% inoculum and cultured for 6 h at 30 °C. Continuous removal of MB has been studied in a fixed bed contactor using immobilized cells as packing materials. Influent concentration (10-30 mg/L) was varied and breakthrough parameters have been determined. With increase in influent concentration from 10 mg/L to 30 mg/L, percentage removal of dye decreases from 72.44% to 49.62%.
纺织工业废水中常见的亚甲基蓝(MB)被选作模型染料,用于研究枯草芽孢杆菌MTCC 441的生物修复作用。游离细胞和海藻酸钙固定化细胞均被用于从废水中去除亚甲基蓝。在间歇式接触器的动力学研究过程中,明智地改变了染料初始浓度(20 - 60 mg/L)、接种量(4 - 8%)和温度(25 - 35 °C)等操作变量。当用8%的接种量接种20 mg/L的亚甲基蓝溶液,并在30 °C下培养6小时时,去除率最高可达91.68%。使用固定化细胞作为填充材料,在固定床接触器中研究了亚甲基蓝的连续去除情况。改变进水浓度(10 - 30 mg/L)并确定了穿透参数。随着进水浓度从10 mg/L增加到30 mg/L,染料去除率从72.44%降至49.62%。