Suppr超能文献

零轮廓椎间融合器螺钉植入物用于单节段颈椎前路椎间盘切除融合术的临床和影像学结果的前瞻性研究:2 年时节段性前凸是否得以维持?

A Prospective Study of Clinical and Radiological Outcomes of Zero-Profile Cage Screw Implants for Single-Level Anterior Cervical Discectomy and Fusion: Is Segmental Lordosis Maintained at 2 Years?

作者信息

Basu Saumyajit, Rathinavelu Sreeramalingam

机构信息

Park Clinic, Kolkata, India.

Ortho One Orthopaedic Subspecialty Centre, Coimbatore, India.

出版信息

Asian Spine J. 2017 Apr;11(2):264-271. doi: 10.4184/asj.2017.11.2.264. Epub 2017 Apr 12.

Abstract

STUDY DESIGN

Prospective cohort study.

PURPOSE

To study clinicoradiological parameters of zero-profile cage screw used for anterior cervical discectomy and fusion (ACDF).

OVERVIEW OF LITERATURE

Radiological parameters of various implants used for ACDF are available, but those for zero-profile cage are sparse.

METHODS

Patients with unilateral intractable brachialgia due to single-level cervical disc prolapse between April 1, 2011 and March 31, 2014 were included. Clinical assessment included arm and neck pain using visual analogue score (VAS) and neck disability index (NDI) scores. Radiological assessment included motion segment height, adjacent disc height (upper and lower), segmental and cervical lordosis, implant subsidence, and pseudoarthrosis. Follow-ups were scheduled at 1, 3, 6, 12, and 24 months.

RESULTS

Thirty-four patients (26 males, 8 females) aged 30-50 years (mean, 42.2) showed excellent clinical improvement based on VAS scores (7.4-0 for arm and 2.0-0.6 for neck pains). Postoperative disc height improved by 11.33% (<0.001), but at 2 years, the score deteriorated by 7.03% (<0.001). Difference in the adjacent segment disc height at 2 years was 0.08% (=0.8) in upper and 0.16% (<0.001) in lower disc spaces. Average segmental lordosis achieved was 5.59° (<0.001) from a preoperative kyphosis of 0.88°; at 2 years, an average loss of 7.05° (<0.001) occurred, resulting in an average segmental kyphosis of 1.38°. Cervical lordosis improved from 11.59° to 14.88° (=0.164), and at 2 years, it progressively improved to 22.59° (<0.001). Three patients showed bone formation and two mild protrusion of the implant at 2 years without pseudoarthrosis/implant failure.

CONCLUSIONS

The zero-profile cage screw device provides good fusion and cervical lordosis but is incapable of maintaining the segmental lordosis achieved up to a 2-year follow-up. We also recommend caution when using it in patients with small vertebrae.

摘要

研究设计

前瞻性队列研究。

目的

研究用于颈椎前路椎间盘切除融合术(ACDF)的零轮廓椎间融合器螺钉的临床放射学参数。

文献综述

有用于ACDF的各种植入物的放射学参数,但关于零轮廓椎间融合器的参数较少。

方法

纳入2011年4月1日至2014年3月31日因单节段颈椎间盘突出导致单侧顽固性臂丛神经痛的患者。临床评估包括使用视觉模拟评分(VAS)评估手臂和颈部疼痛以及颈部功能障碍指数(NDI)评分。放射学评估包括活动节段高度、相邻椎间盘高度(上下)、节段性和颈椎前凸、植入物下沉以及假关节形成。随访安排在1、3、6、12和24个月。

结果

34例患者(26例男性,8例女性),年龄30 - 50岁(平均42.2岁),基于VAS评分显示临床改善良好(手臂疼痛从7.4降至0,颈部疼痛从2.0降至0.6)。术后椎间盘高度改善了11.33%(<0.001),但在2年时,该评分下降了7.03%(<0.001)。2年时相邻节段椎间盘高度在上椎间盘间隙的差异为0.08%(=0.8),在下椎间盘间隙为0.16%(<0.001)。平均节段性前凸从术前的后凸0.88°达到5.59°(<0.001);在2年时,平均损失7.05°(<0.001),导致平均节段性后凸为1.38°。颈椎前凸从11.59°改善到14.88°(=0.164),在2年时,逐渐改善到22.59°(<0.001)。在2年时,3例患者出现骨形成,2例植入物有轻度突出,无假关节/植入物失败。

结论

零轮廓椎间融合器螺钉装置可实现良好的融合和颈椎前凸,但在长达2年的随访中无法维持所达到的节段性前凸。我们还建议在小椎体患者中使用时要谨慎。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验