Yang Jesse Chieh-Szu, Lin Kun-Jhih, Wei Hung-Wen, Tsai Cheng-Lun, Lin Kang-Ping, Lee Pei-Yuan
Division of Joint Reconstruction, Department of Orthopaedics, Taipei Veterans General Hospital, Taipei, Taiwan.
Department of Electrical Engineering, Chung Yuan Christian University, Taoyuan, Taiwan.
Biomed Res Int. 2017;2017:8149109. doi: 10.1155/2017/8149109. Epub 2017 Apr 12.
The clavicle has a complex geometry that makes plate fixation technically difficult. . One hundred clavicles were analyzed. The clavicle bone model was reconstructed by using computed tomography images. The length, diameters, and curvatures of the clavicle were then measured. The female clavicle was shorter, more slender, and less curved in lateral part than the male clavicle. There was a positive relationship between height and clavicle parameters except lateral curve and depth. The measurements of Chinese clavicles were generally smaller than Caucasians. The clavicle curves were correlated with the bone length; thus consideration of the curve variations may be necessary as designing size distribution of clavicle plate.
锁骨具有复杂的几何形状，这使得钢板固定在技术上具有挑战性。对100根锁骨进行了分析。通过使用计算机断层扫描图像重建锁骨骨模型。然后测量锁骨的长度、直径和曲率。女性锁骨比男性锁骨短、更细长，外侧部分弯曲度更小。除了外侧弯曲和深度外，身高与锁骨参数之间存在正相关关系。中国人锁骨的测量值总体上小于高加索人。锁骨曲线与骨长度相关；因此，在设计锁骨钢板的尺寸分布时，可能需要考虑曲线变化。
