Kuang Heide, Xuan Yue, Lu Michelle, Mookhoek Aart, Wisneski Andrew D, Guccione Julius M, Ge Liang, Tseng Elaine E
Department of Surgery, University of California at San Francisco Medical Center and San Francisco Veterans Affairs Medical Center, San Francisco, CA, USA.
Department of Cardio-thoracic Surgery, Erasmus University Medical Center, Rotterdam, The Netherlands.
J Heart Valve Dis. 2017 Jan;26(1):81-89.
Transcatheter aortic valve replacement (TAVR) has recently been shown to be equivalent to surgical aortic valve replacement (SAVR) in intermediate-risk patients. As TAVR expands towards the traditionally SAVR population, TAVR versus SAVR durability becomes increasingly important. While the durability of TAVR is unknown, valve design - particularly with regards to leaflet stress - impacts on valve durability. Although leaflet stress cannot be measured directly, it can be determined using finite element modeling, with such models requiring the mechanical properties of the leaflets. Balloon-expandable TAVR involves the use of bovine pericardial leaflets treated in the same manner as surgical bioprosthetic leaflets. The study aim was to determine the leaflet mechanical properties of Carpentier-Edwards bioprostheses for future TAVR and SAVR computational models.
A total of 35 leaflets were excised from 12 Carpentier-Edwards Model 3000TFX Perimount Magna aortic bioprostheses (21 mm, 23 mm, and 25 mm) and subjected to displacement-controlled equibiaxial stretch testing. The stress-strain data acquired were fitted to a Fung constitutive model to describe the material properties in circumferential and radial directions. Leaflet stiffness was calculated at specified physiological stress, corresponding to zero pressure, systemic pressure, and between zero and systemic pressure.
The 21-mm bioprostheses had significantly thinner leaflets than the larger bioprostheses. A non-linear stress-strain relationship was observed in all leaflets along the circumferential and radial directions. No significant difference in leaflet stiffness at systemic pressure, or between zero and systemic pressure, was found among the three bioprosthesis sizes. However, the leaflets from the 23 mm bioprosthesis were significantly more compliant than those of the 21 mm and 25 mm bioprostheses at zero pressure in the circumferential direction. No differences were observed in leaflet stiffness in circumferential versus radial directions.
The bovine pericardial leaflets from Carpentier-Edwards Perimount Magna bioprostheses showed no differences in material properties among different valve sizes at systemic pressure. The thinner 21 mm leaflets did not show any corresponding differences in leaflet stiffness, which suggests that the thinner TAV leaflets may have a similar stiffness to their thicker SAV counterparts.
经导管主动脉瓣置换术(TAVR)最近已被证明在中度风险患者中与外科主动脉瓣置换术(SAVR)等效。随着TAVR向传统的SAVR人群扩展,TAVR与SAVR的耐久性变得越来越重要。虽然TAVR的耐久性尚不清楚,但瓣膜设计——特别是关于瓣叶应力——会影响瓣膜耐久性。尽管瓣叶应力无法直接测量,但可以使用有限元建模来确定,这种模型需要瓣叶的力学性能。球囊扩张式TAVR涉及使用与外科生物瓣膜瓣叶相同方式处理的牛心包瓣叶。本研究的目的是确定用于未来TAVR和SAVR计算模型的Carpentier-Edwards生物瓣膜的瓣叶力学性能。
从12个Carpentier-Edwards 3000TFX Perimount Magna主动脉生物瓣膜(21毫米、23毫米和25毫米)中切除总共35个瓣叶,并进行位移控制的等双轴拉伸试验。采集的应力-应变数据拟合到Fung本构模型,以描述周向和径向的材料特性。在对应于零压力、体循环压力以及零压力和体循环压力之间的特定生理应力下计算瓣叶刚度。
21毫米的生物瓣膜的瓣叶明显比大尺寸生物瓣膜的瓣叶薄。在所有瓣叶的周向和径向上均观察到非线性应力-应变关系。在三种生物瓣膜尺寸之间,体循环压力下或零压力与体循环压力之间的瓣叶刚度没有显著差异。然而,在零压力下,23毫米生物瓣膜的瓣叶在周向方向上比21毫米和25毫米生物瓣膜的瓣叶明显更柔顺。在周向和径向方向上的瓣叶刚度没有观察到差异。
Carpentier-Edwards Perimount Magna生物瓣膜的牛心包瓣叶在体循环压力下不同瓣膜尺寸之间的材料特性没有差异。较薄的21毫米瓣叶在瓣叶刚度上没有显示出任何相应差异,这表明较薄的TAV瓣叶可能与其较厚的SAV对应瓣叶具有相似的刚度。