Fouchard Alexandre, Coizet Véronique, Sinniger Valérie, Clarençon Didier, Pernet-Gallay Karin, Bonnet Stéphane, David Olivier
CEA-LETI, MINATEC Campus, F-38000 Grenoble, France; Univ Grenoble Alpes, Grenoble Institut des Neurosciences, GIN, F-38000 Grenoble, France; Inserm, U1216, F-38000 Grenoble, France.
Univ Grenoble Alpes, Grenoble Institut des Neurosciences, GIN, F-38000 Grenoble, France; Inserm, U1216, F-38000 Grenoble, France.
J Physiol Paris. 2016 Nov;110(4 Pt A):361-371. doi: 10.1016/j.jphysparis.2017.05.003. Epub 2017 Jun 2.
Medical electrical stimulators adapted to peripheral nerves use multicontact cuff electrodes (MCC) to provide selective neural interfaces. However, neuroprostheses are currently limited by their inability to locate the regions of interest to focus. Intended until now either for stimulation or recording, MCC can also be used as a means of transduction to characterize the nerve by impedancemetry. In this study, we investigate the feasibility of using electrical impedance (EI) measurements as an in vivo functional nerve monitoring technique. The monitoring paradigm includes the synchronized recording of both the evoked endogenous activity as compound action potentials (CAP) and the superimposed sine signal from the EI probe. Measurements were conducted on the sciatic nerve of rodents, chosen for its branchings towards the peroneal and tibial nerves, with both mono- and multi-contact per section electrodes. During stimulation phases, recordings showed CAP with consistent fiber conduction velocities. During coupled phases of both stimulation and sine perturbation, impedance variations were extracted using the mono-contact electrode type for certain frequencies, e.g. 2.941kHz, and were temporally coherent with the previous recorded CAP. Using a MCC, localized evoked CAP were also recorded but the signal to noise ratio (SNR) was too low to distinguish the expected associated impedance variation and deduce an image of impedance spatial changes within the nerve. The conducted in vivo measurements allowed to distinguish both evoked CAP and associated impedance variations with a strong temporal correlation. This indicates the feasibility of functional EI monitoring, aiming at detecting the impedance variations in relation to neural activity. Further work is needed to improve the in vivo system, namely in terms of SNR, and to integrate new multicontact devices in order to move towards EI tomography with the detection of spatially-localized impedance variations. Eventually, regions that are interesting to be targeted by stimulation could be identified through these means.
适用于周围神经的医用电气刺激器使用多触点袖带电极(MCC)来提供选择性神经接口。然而,目前神经假体受到无法定位感兴趣区域以进行聚焦的限制。到目前为止,MCC要么用于刺激要么用于记录,它也可以用作通过阻抗测量来表征神经的一种转导手段。在本研究中,我们研究了将电阻抗(EI)测量用作体内功能性神经监测技术的可行性。监测范式包括同步记录诱发的内源性活动(作为复合动作电位(CAP))和来自EI探头的叠加正弦信号。在啮齿动物的坐骨神经上进行了测量,选择坐骨神经是因为它会分支到腓神经和胫神经,每部分电极既有单触点的也有多触点的。在刺激阶段,记录显示CAP具有一致的纤维传导速度。在刺激和正弦扰动的耦合阶段,使用单触点电极类型在某些频率(例如2.941kHz)下提取阻抗变化,并且这些变化在时间上与先前记录的CAP相关。使用MCC时,也记录到了局部诱发的CAP,但信噪比(SNR)过低,无法区分预期的相关阻抗变化并推断神经内阻抗空间变化的图像。所进行的体内测量能够区分诱发的CAP和具有强时间相关性的相关阻抗变化。这表明功能性EI监测的可行性,旨在检测与神经活动相关的阻抗变化。需要进一步开展工作来改进体内系统,即在SNR方面进行改进,并集成新的多触点设备,以便朝着通过检测空间定位的阻抗变化进行EI断层扫描的方向发展。最终,可以通过这些手段识别出刺激感兴趣的目标区域。