Fowler C J, Thorell G, Andersson M, Magnusson O
Naunyn Schmiedebergs Arch Pharmacol. 1985 Oct;331(1):12-9. doi: 10.1007/BF00498846.
Rat striatal synaptosomal tyrosine hydroxylation was inhibited dose- and pH dependently by a number of dopamine agonists. The catecholic agonists apomorphine and (-)N-n-propylnorapomorphine inhibited synaptosomal tyrosine hydroxylase completely, with IC50 values of around 0.3 mumol/l at pH 6.6. The noncatechol agonists pergolide and bromocriptine and the putative dopamine autoreceptor agonists 3-PPP(-), 3-PPP(+), HW-165 and B-HT 920 produced only partial inhibition of synaptosomal tyrosine hydroxylation at high concentrations. Comparison of the inhibition of synaptosomal and soluble tyrosine hydroxylase indicated that the inhibition produced by apomorphine could be ascribed to a direct effect on the enzyme, whereas this was not the case for the noncatechol agonists. The inhibition produced by pergolide and 3-PPP(-) was not antagonised by either dopamine receptor or alpha-adrenoceptor antagonists. The present results have been compared with results reported in the literature for inhibition of synaptosomal tyrosine hydroxylation and for two other tests of dopamine autoreceptor agonist activity (inhibition of dopamine release from striatal slices in vitro, and inhibition of the gamma-butyrolactone induced increase in dopamine synthesis in vivo). It is concluded that inhibition of striatal synaptosomal tyrosine hydroxylation by dopamine agonists does not fulfil the criteria required for it to be considered as a useful measure of dopamine autoreceptor function.
多种多巴胺激动剂对大鼠纹状体突触体酪氨酸羟化呈剂量和pH依赖性抑制。儿茶酚类激动剂阿扑吗啡和(-)N-正丙基去甲阿扑吗啡完全抑制突触体酪氨酸羟化酶,在pH 6.6时IC50值约为0.3μmol/L。非儿茶酚类激动剂培高利特和溴隐亭以及假定的多巴胺自身受体激动剂3-PPP(-)、3-PPP(+)、HW-165和B-HT 920在高浓度时仅产生部分突触体酪氨酸羟化抑制。突触体酪氨酸羟化酶和可溶性酪氨酸羟化酶抑制作用的比较表明,阿扑吗啡产生的抑制可归因于对该酶的直接作用,而非儿茶酚类激动剂则并非如此。培高利特和3-PPP(-)产生的抑制作用既不被多巴胺受体拮抗剂也不被α-肾上腺素能受体拮抗剂所拮抗。将目前的结果与文献中报道的关于突触体酪氨酸羟化抑制以及多巴胺自身受体激动剂活性的另外两项测试(体外抑制纹状体切片中多巴胺释放以及体内抑制γ-丁内酯诱导的多巴胺合成增加)的结果进行了比较。得出的结论是,多巴胺激动剂对纹状体突触体酪氨酸羟化的抑制不符合将其视为多巴胺自身受体功能有用测量指标所需的标准。