Modified local sands for the mitigation of harmful algal blooms.

A new method was developed for marine harmful algal bloom (HAB) mitigation using local beach sand or silica sand modified with chitosan and polyaluminum chloride (PAC). Untreated sand was ineffective in flocculating algal cells, but 80% removal efficiency was achieved for Hulburt and a sp. in 3 min (t = 3 min) using 120 mg L sand modified with 10 mg L PAC and 10 mg L chitosan. After several hours 92% - 96% removal was achieved. The t for removing using the modifiers only (PAC and chitosan combined) was 60 min and for sp. 120 min, times which are much slower than with the corresponding modified sand. Sands were critical for speeding up the kinetic processes of flocculation and sedimentation of algal flocs. PAC was helpful in forming small flocs and chitosan is essential to bridge the small flocs into large dense flocs. Chitosan was also important in inhibiting the escape of cells from the flocs. Chitosan and PAC used together as modifiers make it possible to use local beach sands for HAB mitigation in seawater. Economical and environmental concerns could be reduced through the use of sands and biodegradable chitosan, but the potential impacts of PAC need further study.