Uma Kasimayan, Pan Guan-Ting, Yang Thomas C-K
Centre for Precision Analysis and Research Center, National Taipei University of Technology, Taipei 106, Taiwan.
Department of Chemical Engineering, National Taipei University of Technology, Taipei 106, Taiwan.
Materials (Basel). 2017 Jun 2;10(6):610. doi: 10.3390/ma10060610.
Metal organic framework (MOF) of MIL-101(Cr)-Silica (SiO₂) composites with highly mesoporous and uniform dispersions were synthesized by a microwave-assisted hydrothermal method followed by the sol-gel technique. Water vapor adsorption experiments were conducted on the MIL-101(Cr)-SiO₂ composites for industrial adsorption chiller applications. The effects of MIL-101(Cr)-SiO₂ mixing ratios (ranging from 0% to 52%), the surface area and amount of Lewis and Brønsted sites were comprehensively determined through water vapor adsorption experiments and the adsorption mechanism is also explained. The BET and Langmuir results indicate that the adsorption isotherms associated with the various MIL-101(Cr)-SiO₂ ratios demonstrated Type I and IV adsorption behavior, due to the mesoporous structure of the MIL-101(Cr)-SiO₂. It was observed that the increase in the amount of Lewis and Brønsted sites on the MIL-101(Cr)-SiO₂ composites significantly improves the water vapor adsorption efficiency, for greater stability during the water vapor adsorption experiments.
采用微波辅助水热法并结合溶胶-凝胶技术合成了具有高度介孔和均匀分散性的MIL-101(Cr)-二氧化硅(SiO₂)复合材料金属有机框架。对MIL-101(Cr)-SiO₂复合材料进行了水蒸气吸附实验,用于工业吸附式制冷机应用。通过水蒸气吸附实验全面测定了MIL-101(Cr)-SiO₂混合比例(范围为0%至52%)、表面积以及路易斯和布朗斯特位点的数量,并对吸附机理进行了解释。BET和朗缪尔结果表明,由于MIL-101(Cr)-SiO₂的介孔结构,与不同MIL-101(Cr)-SiO₂比例相关的吸附等温线表现出I型和IV型吸附行为。观察到MIL-101(Cr)-SiO₂复合材料上路易斯和布朗斯特位点数量的增加显著提高了水蒸气吸附效率,从而在水蒸气吸附实验中具有更高的稳定性。