Wang Le, Liu Na, Guo Zheng, Wu Dapeng, Chen Weiwei, Chang Zheng, Yuan Qipeng, Hui Ming, Wang Jinshui
School of Biological Engineering, Henan University of Technology, Zhengzhou 450001, China.
College of Textile, Zhongyuan University of Technology, Zhengzhou 450001, China.
Materials (Basel). 2016 Mar 17;9(3):206. doi: 10.3390/ma9030206.
Nitric acid (HNO₃)-treated carbon fiber (CF) rich in hydrophilic groups was applied as a cell-immobilized carrier for xylitol fermentation. Using scanning electron microscopy, we characterized the morphology of the HNO₃-treated CF. Additionally, we evaluated the immobilized efficiency (IE) of and xylitol fermentation yield by investigating the surface properties of nitric acid treated CF, specifically, the acidic group content, zero charge point, degree of moisture and contact angle. We found that adhesion is the major mechanism for cell immobilization and that it is greatly affected by the hydrophilic-hydrophilic surface properties. In our experiments, we found 3 hto be the optimal time for treating CF with nitric acid, resulting in an improved IE of of 0.98 g∙g and the highest xylitol yield and volumetric productivity (70.13% and 1.22 g∙L∙h, respectively). The HNO₃-treated CF represents a promising method for preparing biocompatible biocarriers for multi-batch fermentation.
富含亲水性基团的硝酸(HNO₃)处理碳纤维(CF)被用作木糖醇发酵的细胞固定化载体。我们使用扫描电子显微镜对硝酸处理后的CF形态进行了表征。此外,通过研究硝酸处理CF的表面性质,特别是酸性基团含量、零电荷点、湿度和接触角,我们评估了其固定化效率(IE)和木糖醇发酵产率。我们发现,细胞固定化的主要机制是粘附,并且它受到亲水性-亲水性表面性质的极大影响。在我们的实验中,我们发现用硝酸处理CF的最佳时间为3小时,这使得IE提高到0.98 g∙g,木糖醇产率和体积生产率最高(分别为70.13%和1.22 g∙L∙h)。硝酸处理后的CF是一种用于多批次发酵制备生物相容性生物载体的有前途的方法。