Science and Engineering Faculty, Queensland University of Technology (QUT), 2 George St, Brisbane, QLD 4000, Australia; Department of Mechanical Engineering, Dhaka University of Engineering & Technology, Gazipur 1700, Bangladesh.
Science and Engineering Faculty, Queensland University of Technology (QUT), 2 George St, Brisbane, QLD 4000, Australia.
Food Res Int. 2017 Sep;99(Pt 1):1-14. doi: 10.1016/j.foodres.2017.06.037. Epub 2017 Jun 19.
Heterogeneous and hygroscopic characteristics of plant-based food material make it complex in structure, and therefore water distribution in its different cellular environments is very complex. There are three different cellular environments, namely the intercellular environment, the intracellular environment, and the cell wall environment inside the food structure. According to the bonding strength, intracellular water is defined as loosely bound water, cell wall water is categorized as strongly bound water, and intercellular water is known as free water (FW). During food drying, optimization of the heat and mass transfer process is crucial for the energy efficiency of the process and the quality of the product. For optimizing heat and mass transfer during food processing, understanding these three types of waters (strongly bound, loosely bound, and free water) in plant-based food material is essential. However, there are few studies that investigate cellular level water distribution and transport. As there is no direct method for determining the cellular level water distributions, various indirect methods have been applied to investigate the cellular level water distribution, and there is, as yet, no consensus on the appropriate method for measuring cellular level water in plant-based food material. Therefore, the main aim of this paper is to present a comprehensive review on the available methods to investigate the cellular level water, the characteristics of water at different cellular levels and its transport mechanism during drying. The effect of bound water transport on quality of food product is also discussed. This review article presents a comparative study of different methods that can be applied to investigate cellular water such as nuclear magnetic resonance (NMR), bioelectric impedance analysis (BIA), differential scanning calorimetry (DSC), and dilatometry. The article closes with a discussion of current challenges to investigating cellular water.
植物性食品材料的异质性和吸湿性使其结构复杂,因此其不同细胞环境中的水分分布非常复杂。食品结构内存在三种不同的细胞环境,分别是细胞间环境、细胞内环境和细胞壁环境。根据结合强度,细胞内水被定义为结合较弱的水,细胞壁水被归类为结合较强的水,而细胞间水则被称为自由水(FW)。在食品干燥过程中,优化传热和传质过程对于提高过程的能量效率和产品质量至关重要。为了优化食品加工过程中的传热和传质,了解植物性食品材料中的这三种水(强结合水、弱结合水和自由水)非常重要。然而,目前很少有研究调查细胞水平的水分分布和传输。由于没有直接的方法来确定细胞水平的水分分布,因此已经应用了各种间接方法来研究细胞水平的水分分布,并且对于测量植物性食品材料中细胞水平水分的适当方法尚未达成共识。因此,本文的主要目的是全面综述现有的方法,以研究细胞水平水分、不同细胞水平水分的特性及其在干燥过程中的传输机制。还讨论了结合水传输对食品产品质量的影响。本文对可用于研究细胞水的不同方法进行了比较研究,如核磁共振(NMR)、生物电阻抗分析(BIA)、差示扫描量热法(DSC)和膨胀法。文章最后讨论了研究细胞水目前面临的挑战。