Suppr超能文献

一种基于改进型SRR和CLS单元胞的具有负折射率超材料的小型化天线,用于超宽带微波成像应用。

A Miniaturized Antenna with Negative Index Metamaterial Based on Modified SRR and CLS Unit Cell for UWB Microwave Imaging Applications.

作者信息

Islam Md Moinul, Islam Mohammad Tariqul, Samsuzzaman Md, Faruque Mohammad Rashed Iqbal, Misran Norbahiah, Mansor Mohd Fais

机构信息

Space Science Centre (ANGKASA), Research Centre Building, Universiti Kebangsaan Malaysia, 43600 UKM, Bangi, Selangor, Malaysia.

Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 UKM, Bangi, Selangor, Malaysia.

出版信息

Materials (Basel). 2015 Jan 23;8(2):392-407. doi: 10.3390/ma8020392.

Abstract

A miniaturized antenna employing a negative index metamaterial with modified split-ring resonator (SRR) and capacitance-loaded strip (CLS) unit cells is presented for Ultra wideband (UWB) microwave imaging applications. Four left-handed (LH) metamaterial (MTM) unit cells are located along one axis of the antenna as the radiating element. Each left-handed metamaterial unit cell combines a modified split-ring resonator (SRR) with a capacitance-loaded strip (CLS) to obtain a design architecture that simultaneously exhibits both negative permittivity and negative permeability, which ensures a stable negative refractive index to improve the antenna performance for microwave imaging. The antenna structure, with dimension of 16 × 21 × 1.6 mm³, is printed on a low dielectric FR4 material with a slotted ground plane and a microstrip feed. The measured reflection coefficient demonstrates that this antenna attains 114.5% bandwidth covering the frequency band of 3.4-12.5 GHz for a voltage standing wave ratio of less than 2 with a maximum gain of 5.16 dBi at 10.15 GHz. There is a stable harmony between the simulated and measured results that indicate improved nearly omni-directional radiation characteristics within the operational frequency band. The stable surface current distribution, negative refractive index characteristic, considerable gain and radiation properties make this proposed negative index metamaterial antenna optimal for UWB microwave imaging applications.

摘要

本文提出了一种采用具有改进型分裂环谐振器(SRR)和电容加载带(CLS)单元胞的负折射率超材料的小型化天线,用于超宽带(UWB)微波成像应用。四个左手(LH)超材料(MTM)单元胞沿天线的一个轴排列作为辐射元件。每个左手超材料单元胞将一个改进型分裂环谐振器(SRR)与一个电容加载带(CLS)相结合,以获得一种同时呈现负介电常数和负磁导率的设计架构,这确保了稳定的负折射率,从而改善天线在微波成像方面的性能。该天线结构尺寸为16×21×1.6 mm³,印刷在具有开槽接地平面和微带馈电的低介电常数FR4材料上。测量得到的反射系数表明,该天线在电压驻波比小于2时,实现了覆盖3.4 - 12.5 GHz频段的114.5%带宽,在10.15 GHz处的最大增益为5.16 dBi。模拟结果与测量结果之间存在稳定的一致性,表明在工作频段内具有改善的近全向辐射特性。稳定的表面电流分布、负折射率特性、可观的增益和辐射特性使得这种提出的负折射率超材料天线非常适合UWB微波成像应用。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/55d9/5455264/6551df7439db/materials-08-00392-g001.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验