Suppr超能文献

玻璃态聚合物膜中气体传输的热力学建模

Thermodynamic Modeling of Gas Transport in Glassy Polymeric Membranes.

作者信息

Minelli Matteo, Sarti Giulio Cesare

机构信息

Department of Civil, Chemical, Environmental and Materials Engineering (DICAM), Alma Mater Studiorum-University of Bologna, Via Terracini, 28-I-40131 Bologna, Italy.

出版信息

Membranes (Basel). 2017 Aug 19;7(3):46. doi: 10.3390/membranes7030046.

Abstract

Solubility and permeability of gases in glassy polymers have been considered with the aim of illustrating the applicability of thermodynamically-based models for their description and prediction. The solubility isotherms are described by using the nonequilibrium lattice fluid (NELF) (model, already known to be appropriate for nonequilibrium glassy polymers, while the permeability isotherms are described through a general transport model in which diffusivity is the product of a purely kinetic factor, the mobility coefficient, and a thermodynamic factor. The latter is calculated from the NELF model and mobility is considered concentration-dependent through an exponential relationship containing two parameters only. The models are tested explicitly considering solubility and permeability data of various penetrants in three glassy polymers, PSf, PPh and 6FDA-6FpDA, selected as the reference for different behaviors. It is shown that the models are able to calculate the different behaviors observed, and in particular the permeability dependence on upstream pressure, both when it is decreasing as well as when it is increasing, with no need to invoke the onset of additional plasticization phenomena. The correlations found between polymer and penetrant properties with the two parameters of the mobility coefficient also lead to the predictive ability of the transport model.

摘要

研究了气体在玻璃态聚合物中的溶解度和渗透性,目的是说明基于热力学的模型在描述和预测它们时的适用性。溶解度等温线用非平衡晶格流体(NELF)模型描述,该模型已被证明适用于非平衡玻璃态聚合物,而渗透等温线则通过一个通用传输模型来描述,其中扩散系数是一个纯动力学因素(迁移率系数)和一个热力学因素的乘积。后者由NELF模型计算得出,迁移率通过仅包含两个参数的指数关系被认为与浓度有关。通过明确考虑三种玻璃态聚合物(PSf、PPh和6FDA - 6FpDA)中各种渗透剂的溶解度和渗透性数据对模型进行了测试,这三种聚合物被选作不同行为的参考。结果表明,该模型能够计算出观察到的不同行为,特别是渗透率对上游压力的依赖性,无论是压力降低还是升高时,都无需引入额外的增塑现象。聚合物和渗透剂性质与迁移率系数的两个参数之间的相关性也导致了传输模型的预测能力。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/cead/5618131/6bf45f4f290c/membranes-07-00046-g001.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验