Minelli Matteo, Sarti Giulio C
Department of Civil, Chemical, Environmental and Materials Engineering (DICAM), Alma Mater Studiorum-University of Bologna, Via Terracini, 28, 40131 Bologna, Italy.
Membranes (Basel). 2018 Feb 3;8(1):8. doi: 10.3390/membranes8010008.
The transport of gases in glassy polymeric membranes has been analyzed by means of a fundamental approach based on the nonequilibrium thermodynamic model for glassy polymers (NET-GP) that considers the penetrant chemical potential gradient as the actual driving force of the diffusional process. The diffusivity of a penetrant is thus described as the product of a purely kinetic quantity, the penetrant mobility, and a thermodynamic factor, accounting for the chemical potential dependence on its concentration in the polymer. The NET-GP approach, and the nonequilibrium lattice fluid (NELF) model in particular, describes the thermodynamic behavior of penetrant/polymer mixtures in the glassy state, at each pressure or composition. Moreover, the mobility is considered to follow a simple exponential dependence on penetrant concentration, as typically observed experimentally, using only two adjustable parameters, the infinite dilution penetrant mobility and the plasticization factor , both determined from the analysis of the dependence of steady state permeability on upstream pressure. The available literature data of diffusional time lag as a function of penetrant upstream pressure has been reviewed and compared with model predictions, obtained after the values of the two model parameters ( and ), have been conveniently determined from steady state permeability data. The model is shown to be able to describe very accurately the experimental time lag behaviors for all penetrant/polymer pairs inspected, including those presenting an increasing permeability with increasing upstream pressure. The model is thus more appropriate than the one based on Dual Mode Sorption, which usually provides an unsatisfactory description of time lag and required an ad hoc modification.
通过基于玻璃态聚合物非平衡热力学模型(NET-GP)的基本方法,对气体在玻璃态聚合物膜中的传输进行了分析,该模型将渗透剂化学势梯度视为扩散过程的实际驱动力。因此,渗透剂的扩散系数被描述为一个纯动力学量(渗透剂迁移率)与一个热力学因子的乘积,该热力学因子考虑了化学势对其在聚合物中浓度的依赖性。NET-GP方法,特别是非平衡晶格流体(NELF)模型,描述了在每种压力或组成下,玻璃态渗透剂/聚合物混合物的热力学行为。此外,迁移率被认为遵循对渗透剂浓度的简单指数依赖性,这是实验中通常观察到的,仅使用两个可调参数,即无限稀释渗透剂迁移率和增塑因子,这两个参数均通过对稳态渗透率对上游压力的依赖性分析来确定。对作为渗透剂上游压力函数的扩散时间滞后的现有文献数据进行了综述,并与模型预测进行了比较,模型预测是在从稳态渗透率数据方便地确定了两个模型参数( 和 )的值之后获得的。结果表明,该模型能够非常准确地描述所有检查的渗透剂/聚合物对的实验时间滞后行为,包括那些随着上游压力增加渗透率增加的情况。因此,该模型比基于双模吸附的模型更合适,后者通常对时间滞后的描述不令人满意,并且需要进行特殊修改。