Nasseh Ibrahim, Jensen Douglas, Noujeim Marcel
Department of DentoMaxillofacial Radiology and Imaging School of Dentistry, Lebanese University, Beirut, Lebanon.
Department of developmental dentistry The University of Texas Health Science Center, San Antonio School of Dentistry, San Antonio, TX, USA.
Open Dent J. 2017 Jun 30;11:338-349. doi: 10.2174/1874210601711010338. eCollection 2017.
Use of cone beam computed tomography (CBCT) in orthodontics is increasing; however, some patients started treatment with conventional images. The objective of this study is to manipulate CBCT panoramic reconstruction to make it comparable to conventional panoramic image and to compare mesiodistal root angulations on both images.
Concurrent conventional panoramics and CBCT volumes were obtained from 40 subjects. CBCT volumes were manipulated to generate pan-like images that mimic the occlusal plane angle of the corresponding panoramic, allowing comparison of mesiodistal root angulations and determination of the head-tilt required to produce the reconstruction.
Clinically meaningful differences ( < .05) in the mesiodistal root angulations between standard panoramics and CBCT reconstructions emerged for 13 out of 24 teeth (54%). Greatest variations were seen in the maxillary and mandibular sextants and in first molar regions. Ideal axial head-tilt for image acquisition was determined to be with Frankfort horizontal plane 3.3 nose down.
CBCT pan images must be used with caution due to variation between methods in specific areas of arches. The images can be useful for the assessment of mesiodistal root angulations if the volume is properly manipulated to create a pan-like image.
锥形束计算机断层扫描(CBCT)在正畸学中的应用日益增加;然而,一些患者开始治疗时使用的是传统影像。本研究的目的是对CBCT全景重建进行处理,使其与传统全景影像具有可比性,并比较两种影像上牙齿近远中牙根角度。
从40名受试者处同时获取传统全景影像和CBCT容积数据。对CBCT容积数据进行处理,生成类似全景影像的图像,模拟相应全景影像的咬合平面角度,以便比较牙齿近远中牙根角度,并确定生成重建图像所需的头部倾斜角度。
24颗牙齿中有13颗(54%)在标准全景影像和CBCT重建影像之间的近远中牙根角度出现了具有临床意义的差异(<0.05)。在上颌和下颌象限以及第一磨牙区域观察到最大差异。确定图像采集的理想轴向头部倾斜角度为法兰克福水平面鼻向下3.3°。
由于牙弓特定区域方法之间存在差异,使用CBCT全景影像时必须谨慎。如果对容积数据进行适当处理以创建类似全景的图像,这些图像可用于评估近远中牙根角度。