King Abdullah University of Science and Technology (KAUST) , Physical Sciences and Engineering Division, Thuwal 23955-6900, Saudi Arabia.
ACS Appl Mater Interfaces. 2017 Oct 25;9(42):37120-37127. doi: 10.1021/acsami.7b09645. Epub 2017 Oct 16.
Enhanced ultraviolet (UV) photodetectors (PDs) with high responsivity comparable to that of visible and infrared photodetectors are needed for commercial applications. n-Type ZnO nanotubes (NTs) with high-quality optical, structural, and electrical properties on a p-type Si(100) substrate are successfully fabricated by pulsed laser deposition (PLD) to produce a UV PD with high responsivity, for the first time. We measure the current-voltage characteristics of the device under dark and illuminated conditions and demonstrated the high stability and responsivity (that reaches ∼101.2 A W) of the fabricated UV PD. Time-resolved spectroscopy is employed to identify exciton confinement, indicating that the high PD performance is due to optical confinement, the high surface-to-volume ratio, the high structural quality of the NTs, and the high photoinduced carrier density. The superior detectivity and responsivity of our NT-based PD clearly demonstrate that fabrication of high-performance UV detection devices for commercial applications is possible.
需要具有高光敏度的增强型紫外线 (UV) 光电探测器 (PD),其灵敏度可与可见光和红外光电探测器相媲美。首次通过脉冲激光沉积 (PLD) 在 p 型 Si(100) 衬底上成功制备了具有高光敏度的高质量光电导、结构和电学性能的 n 型 ZnO 纳米管 (NTs),从而制备出具有高光敏度的 UV PD。我们在暗态和光照条件下测量了器件的电流-电压特性,并证明了所制备的 UV PD 的高稳定性和灵敏度(高达 ∼101.2 A W)。我们采用时间分辨光谱来确定激子限制,表明 PD 具有优异性能的原因在于光学限制、高的比表面积、NTs 的高质量结构和高的光生载流子密度。我们基于 NT 的 PD 的卓越探测率和灵敏度清楚地表明,有可能为商业应用制造高性能的 UV 检测设备。