Rambourg A, Clermont Y, Hermo L, Chrétien M
Département de Biologie du CEA, Saclay, France.
Am J Anat. 1989 Jan;184(1):52-61. doi: 10.1002/aja.1001840106.
The three-dimensional structure of the components of the Golgi apparatus was analyzed in plasma cells of rat duodenum. The spheroidal juxtanuclear Golgi apparatus was formed by a continuous ribbonlike structure composed of the following stacked elements. On the cis-face of the Golgi stack, there was a tubular membranous network referred to as the cis-element and/or a slightly dilated saccule perforated with small pores. The two or three subjacent saccules, which showed few pores, were slightly dilated and contained a fluffy granulofilamentous material. They were also perforated in register by cavities or wells containing 80-nm vesicles. The next one or two underlying elements were fenestrated saccules showing flattened portions as well as distended portions containing a homogeneous material denser than that seen in the overlying saccules. The last two or three elements of the stack showed a partially separated or "peeling off" configuration. These last elements consisted of prosecretory granules attached to flattened, empty-looking saccules showing buds at their surface; detached, more-or-less fenestrated, flattened saccules; and shrivelled residual trans-tubular networks. In the trans-region of the stack, in addition to numerous small vesicles, short membranous tubules, detached prosecretory granules, and denser fully formed secretion granules were also seen. These images were interpreted to indicate that secretory material present in the trans-saccules flows toward the dilated portions which become prosecretory granules. The trans-most elements seemingly peel off the stack to yield prosecretory granules and fragmenting trans-tubular networks.
对大鼠十二指肠浆细胞中高尔基体各组成部分的三维结构进行了分析。球状的近核高尔基体由连续的带状结构组成,该带状结构由以下堆叠的元件构成。在高尔基体堆叠的顺面,有一个称为顺式元件的管状膜网络和/或一个有小孔的轻度扩张的囊泡。下面的两三个囊泡几乎没有孔,轻度扩张,含有蓬松的颗粒状丝状物质。它们也被含有80纳米囊泡的腔或孔对齐穿孔。接下来的一两个下层元件是有窗孔的囊泡,有扁平部分以及含有比上层囊泡中所见物质更致密的均匀物质的扩张部分。堆叠的最后两三个元件呈现出部分分离或“剥离”的形态。这些最后的元件由附着在表面有芽的扁平、看似空的囊泡上的分泌前颗粒、分离的、或多或少有窗孔的扁平囊泡以及皱缩的残余反式管状网络组成。在堆叠的反面区域,除了众多小囊泡外,还可见短的膜性小管、分离的分泌前颗粒和更致密的完全形成的分泌颗粒。这些图像被解释为表明存在于反面囊泡中的分泌物质流向扩张部分,这些扩张部分会变成分泌前颗粒。最反面的元件似乎从堆叠上剥离,产生分泌前颗粒和碎片化的反式管状网络。