软性输尿管镜检查中的碳足迹:可重复使用和一次性使用输尿管镜对环境影响的比较研究。
Carbon Footprint in Flexible Ureteroscopy: A Comparative Study on the Environmental Impact of Reusable and Single-Use Ureteroscopes.
作者信息
Davis Niall F, McGrath Shannon, Quinlan Mark, Jack Gregory, Lawrentschuk Nathan, Bolton Damien M
机构信息
Department of Urology, Austin Hospital , Melbourne, Australia .
出版信息
J Endourol. 2018 Mar;32(3):214-217. doi: 10.1089/end.2018.0001. Epub 2018 Feb 21.
PURPOSE
There are no comparative assessments on the environmental impact of endourologic instruments. We evaluated and compared the environmental impact of single-use flexible ureteroscopes with reusable flexible ureteroscopes.
PATIENTS AND METHODS
An analysis of the typical life cycle of the LithoVue™ (Boston Scientific) single-use digital flexible ureteroscope and Olympus Flexible Video Ureteroscope (URV-F) was performed. To measure the carbon footprint, data were obtained on manufacturing of single-use and reusable flexible ureteroscopes and from typical uses obtained with a reusable scope, including repairs, replacement instruments, and ultimate disposal of both ureteroscopes. The solid waste generated (kg) and energy consumed (kWh) during each case were quantified and converted into their equivalent mass of carbon dioxide (kg of CO) released.
RESULTS
Flexible ureteroscopic raw materials composed of plastic (90%), steel (4%), electronics (4%), and rubber (2%). The manufacturing cost of a flexible ureteroscope was 11.49 kg of CO per 1 kg of ureteroscope. The weight of the single-use LithoVue and URV-F flexible ureteroscope was 0.3 and 1 kg, respectively. The total carbon footprint of the lifecycle assessment of the LithoVue was 4.43 kg of CO per endourologic case. The total carbon footprint of the lifecycle of the reusable ureteroscope was 4.47 kg of CO per case.
CONCLUSION
The environmental impacts of the reusable flexible ureteroscope and the single-use flexible ureteroscope are comparable. Urologists should be aware that the typical life cycle of urologic instruments is a concerning source of environmental emissions.
目的
目前尚无关于腔内泌尿外科器械环境影响的比较评估。我们评估并比较了一次性使用软性输尿管镜和可重复使用软性输尿管镜对环境的影响。
患者与方法
对LithoVue™(波士顿科学公司)一次性使用数字软性输尿管镜和奥林巴斯软性视频输尿管镜(URV-F)的典型生命周期进行了分析。为测量碳足迹,获取了一次性使用和可重复使用软性输尿管镜的制造数据,以及可重复使用器械的典型使用数据,包括维修、更换器械以及两种输尿管镜的最终处置。对每个病例产生的固体废物(千克)和消耗的能源(千瓦时)进行了量化,并换算成其等效释放的二氧化碳质量(千克CO)。
结果
软性输尿管镜的原材料包括塑料(90%)、钢材(4%)、电子元件(4%)和橡胶(2%)。每1千克软性输尿管镜的制造成本相当于11.49千克CO。一次性使用的LithoVue和URV-F软性输尿管镜的重量分别为0.3千克和1千克。LithoVue生命周期评估的总碳足迹为每例腔内泌尿外科手术4.43千克CO。可重复使用输尿管镜生命周期的总碳足迹为每例4.47千克CO。
结论
可重复使用软性输尿管镜和一次性使用软性输尿管镜对环境的影响相当。泌尿外科医生应意识到,泌尿外科器械的典型生命周期是一个令人担忧的环境排放源。