Suppr超能文献

使用三维千伏锥形束 CT 和单次有限视野二维千伏射线照相进行颅放射治疗的 2D-3D 配准。

2D-3D registration for cranial radiation therapy using a 3D kV CBCT and a single limited field-of-view 2D kV radiograph.

机构信息

Department of Radiation Oncology, The Warren Alpert Medical School of Brown University, Providence, RI, 02903, USA.

Department of Radiation Oncology, Weill Cornell Medicine, New York, NY, 10065, USA.

出版信息

Med Phys. 2018 May;45(5):1794-1810. doi: 10.1002/mp.12823. Epub 2018 Mar 24.

Abstract

PURPOSE

We present and evaluate a fully automated 2D-3D intensity-based registration framework using a single limited field-of-view (FOV) 2D kV radiograph and a 3D kV CBCT for 3D estimation of patient setup errors during brain radiotherapy.

METHODS

We evaluated two similarity measures, the Pearson correlation coefficient on image intensity values (ICC) and maximum likelihood measure with Gaussian noise (MLG), derived from the statistics of transmission images. Pose determination experiments were conducted on 2D kV radiographs in the anterior-posterior (AP) and left lateral (LL) views and 3D kV CBCTs of an anthropomorphic head phantom. In order to minimize radiation exposure and exclude nonrigid structures from the registration, limited FOV 2D kV radiographs were employed. A spatial frequency band useful for the 2D-3D registration was identified from the bone-to-no-bone spectral ratio (BNBSR) of digitally reconstructed radiographs (DRRs) computed from the 3D kV planning CT of the phantom. The images being registered were filtered accordingly prior to computation of the similarity measures. We evaluated the registration accuracy achievable with a single 2D kV radiograph and with the registration results from the AP and LL views combined. We also compared the performance of the 2D-3D registration solutions proposed to that of a commercial 3D-3D registration algorithm, which used the entire skull for the registration. The ground truth was determined from markers affixed to the phantom and visible in the CBCT images.

RESULTS

The accuracy of the 2D-3D registration solutions, as quantified by the root mean squared value of the target registration error (TRE) calculated over a radius of 3 cm for all poses tested, was ICC : 0.56 mm, MLG : 0.74 mm, ICC : 0.57 mm, MLG : 0.54 mm, ICC (AP and LL combined): 0.19 mm, and MLG (AP and LL combined): 0.21 mm. The accuracy of the 3D-3D registration algorithm was 0.27 mm. There was no significant difference in mean TRE for the 2D-3D registration algorithms using a single 2D kV radiograph with similarity measure and image view point. There was no significant difference in mean TRE between ICC , MLG , ICC (AP and LL combined), MLG (AP and LL combined), and the 3D-3D registration algorithm despite the smaller FOV used for the 2D-3D registration. While submillimeter registration accuracy was obtained with both ICC and MLG using a single 2D kV radiograph, combining the results from the two projection views resulted in a significantly smaller (P≤0.05) mean TRE.

CONCLUSIONS

Our results indicate that it is possible to achieve submillimeter registration accuracy with both ICC and MLG using either single or dual limited FOV 2D kV radiographs of the head in the AP and LL views. The registration accuracy suggests that the 2D-3D registration solutions presented are suitable for the estimation of patient setup errors not only during conventional brain radiation therapy, but also during stereotactic procedures and proton radiation therapy where tighter setup margins are required.

摘要

目的

我们提出并评估了一种完全自动化的二维到三维基于强度的配准框架,该框架使用单次有限视野(FOV)二维千伏 X 射线和三维千伏锥形束 CT 进行配准,以估计脑放射治疗期间患者的三维摆位误差。

方法

我们评估了两种相似性度量,即基于图像强度值的皮尔逊相关系数(ICC)和最大似然度量与高斯噪声(MLG),这两种度量都来自于透射图像的统计信息。在人体头部模拟体模的前后位(AP)和左侧位(LL)二维千伏 X 射线以及三维千伏锥形束 CT 上进行了位姿确定实验。为了最小化辐射暴露并排除配准中的非刚性结构,使用了有限 FOV 的二维千伏 X 射线。从模拟体模的三维千伏计划 CT 计算的数字重建射线照片(DRR)的骨与无骨光谱比(BNBSR)中确定了用于二维到三维配准的有用空间频率带。在计算相似性度量之前,对要配准的图像进行相应的滤波。我们评估了使用单个二维千伏 X 射线和使用 AP 和 LL 视图组合的二维到三维配准结果可实现的配准精度。我们还比较了所提出的二维到三维配准解决方案与使用整个颅骨进行配准的商业三维到三维配准算法的性能。通过贴在模拟体上并在 CBCT 图像中可见的标记确定了地面实况。

结果

使用所有测试位姿的 3cm 半径计算的靶标注册误差(TRE)均方根值定量评估的二维到三维配准解决方案的精度为 ICC:0.56mm,MLG:0.74mm,ICC:0.57mm,MLG:0.54mm,ICC(AP 和 LL 组合):0.19mm,MLG(AP 和 LL 组合):0.21mm。三维到三维配准算法的精度为 0.27mm。使用具有相似性度量和图像视点的单个二维千伏 X 射线的二维到三维配准算法的平均 TRE 没有显著差异。尽管二维到三维配准使用的 FOV 较小,但 ICC、MLG、ICC(AP 和 LL 组合)、MLG(AP 和 LL 组合)和三维到三维配准算法之间的平均 TRE 没有显著差异。尽管使用单个二维千伏 X 射线使用 ICC 和 MLG 都可以获得亚毫米级的配准精度,但组合两个投影视图的结果会导致显著更小的(P≤0.05)平均 TRE。

结论

我们的结果表明,使用 AP 和 LL 视图的单次或双次有限 FOV 二维千伏 X 射线可以使用 ICC 和 MLG 实现亚毫米级的配准精度。配准精度表明,所提出的二维到三维配准解决方案不仅适用于常规脑放射治疗期间患者的摆位误差估计,也适用于立体定向手术和质子放射治疗期间需要更严格的摆位精度的情况。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验