Suppr超能文献

奥托·奥夫兰克奖:与非交联聚乙烯相比,交联聚乙烯在15年随访时可降低全髋关节置换术的磨损、骨溶解和翻修率。

Otto Aufranc Award: Crosslinking Reduces THA Wear, Osteolysis, and Revision Rates at 15-year Followup Compared With Noncrosslinked Polyethylene.

作者信息

Hopper Robert H, Ho Henry, Sritulanondha Supatra, Williams Ann C, Engh Charles A

机构信息

R. H. Hopper, H. Ho, S. Sritulanondha, A. C. Williams, C. A. Engh, Anderson Orthopaedic Research Institute, Alexandria, VA, USA C. A. Engh, Inova Center for Joint Replacement at Mount Vernon Hospital, Alexandria, VA, USA.

出版信息

Clin Orthop Relat Res. 2018 Feb;476(2):279-290. doi: 10.1007/s11999.0000000000000036.

Abstract

BACKGROUND

Crosslinked polyethylene (XLPE) liners used for primary THA have demonstrated lower wear rates than noncrosslinked, conventional polyethylene (CPE) liners through the first decade of clinical service. However, little high-quality evidence is currently available regarding the second decade performance of these implants and it remains uncertain whether the onset of osteolysis has simply been delayed or if the wear associated with XLPE liners will remain low enough that osteolysis will not occur. It is also unknown how the potential reductions in wear and osteolysis will influence long-term revision rates.

QUESTIONS/PURPOSES: Do patients who underwent THA with XLPE liners demonstrate (1) a lower rate of revision for wear-related complications; (2) a reduced wear rate; and (3) a lower frequency of osteolysis compared with those with CPE liners?

METHODS

Over an 18-month period from 1999 to 2000, 226 patients who had 236 primary THAs consented to participate in a randomized controlled trial conducted at one institution. To be eligible for intraoperative randomization, patients had to be implanted with a 28-mm cobalt-chrome alloy femoral head, a 4-mm lateralized liner, and the same cup and stem design. Six patients with six THAs were excluded intraoperatively because they did not receive study components for reasons unrelated to the liner material. The remaining 230 THAs among 220 patients were randomized to XLPE liners or CPE liners. The mean age at surgery was 62 ± 11 years and there were no differences in age, gender, or body mass index among the groups. There was no differential loss to followup between the study groups; among patients not known to be deceased or having undergone revision, minimum 14-year radiographic followup is available for 85 THAs including 46 with XLPE and 39 with CPE liners. Polyethylene wear was measured radiographically using Martell's Hip Analysis Suite and areas of osteolysis were evaluated before revision or at most recent followup. Revision rates at 15 years using reoperation for any reason and revision for wear or osteolysis were calculated using cumulative incidence considering patient death as a competing risk.

RESULTS

The cumulative incidence of revision at 15 years using reoperation for wear-related complications as an endpoint was lower in the XLPE group than the CPE group (0%, 95% confidence interval [CI], 0%-0% versus 12%, 95% CI, 7%-19%; p < 0.001). Among unrevised THAs with minimum 14-year radiographic followup, the mean steady-state linear wear rate for THAs with XLPE liners was lower than the mean linear wear rate for the THAs with CPE liners (0.03 ± 0.05 versus 0.17 ± 0.09 mm/year; mean difference, 0.14; 95% CI, 0.11-0.17; p < 0.001). Osteolysis of any size was noted among 9% (four of 46) of the hips in the XLPE group and 46% (18 of 39) of the hips in the CPE group (odds ratio, 0.19; 95% CI, 0.07-0.51; p < 0.001).

CONCLUSIONS

This randomized study with followup into the second decade demonstrated reductions in revision, wear, and osteolysis associated with the use of XLPE. The low wear rates and absence of any mechanical failures among the XLPE liners at long-term followup affirm the durability of these components that did not incorporate antioxidants. Although osteolysis has not been eliminated, it occurs infrequently and has not caused any clinical problems to date.

LEVEL OF EVIDENCE

Level I, therapeutic study.

摘要

背景

用于初次全髋关节置换术(THA)的交联聚乙烯(XLPE)内衬在临床使用的第一个十年中显示出比非交联的传统聚乙烯(CPE)内衬更低的磨损率。然而,目前关于这些植入物第二个十年性能的高质量证据很少,并且仍然不确定骨溶解的发生是否仅仅被延迟,或者与XLPE内衬相关的磨损是否会保持足够低以至于不会发生骨溶解。同样未知的是磨损和骨溶解的潜在减少将如何影响长期翻修率。

问题/目的:与使用CPE内衬的患者相比,接受使用XLPE内衬的THA的患者是否表现出(1)与磨损相关并发症的翻修率更低;(2)磨损率降低;以及(3)骨溶解频率更低?

方法

在1999年至2000年的18个月期间,226例接受236次初次THA的患者同意参与在一个机构进行的随机对照试验。为了符合术中随机分组的条件,患者必须植入一个28毫米的钴铬合金股骨头、一个4毫米偏外侧的内衬以及相同的髋臼杯和股骨柄设计。6例接受6次THA的患者在术中被排除,因为他们因与内衬材料无关的原因未接受研究部件。220例患者中的其余230次THA被随机分为XLPE内衬组或CPE内衬组。手术时的平均年龄为62±11岁,各组之间在年龄、性别或体重指数方面没有差异。研究组之间在随访中没有差异丢失;在已知未死亡或未接受翻修的患者中,对85次THA有至少14年的影像学随访,包括46例使用XLPE内衬的和39例使用CPE内衬的。使用Martell髋关节分析套件通过影像学测量聚乙烯磨损,并在翻修前或最近一次随访时评估骨溶解区域。使用累积发病率计算15年时因任何原因再次手术的翻修率以及因磨损或骨溶解进行翻修的翻修率,将患者死亡视为竞争风险。

结果

以因磨损相关并发症再次手术作为终点,XLPE组15年时的累积翻修发生率低于CPE组(分别为0%,95%置信区间[CI],0% - 0% 与12%,95% CI,7% - 19%;p < 0.001)。在有至少14年影像学随访的未翻修THA中,使用XLPE内衬的THA的平均稳态线性磨损率低于使用CPE内衬的THA的平均线性磨损率(分别为0.03±0.05与0.17±0.09毫米/年;平均差异为0.14;95% CI,0.11 - 0.17;p < 0.001)。XLPE组9%(46例中的4例)的髋关节出现任何大小的骨溶解,CPE组为46%(39例中的18例)(优势比为0.19;95% CI,0.07 - 0.51;p < 0.001)。

结论

这项随访至第二个十年的随机研究表明,使用XLPE可降低翻修、磨损和骨溶解。长期随访中XLPE内衬的低磨损率以及未出现任何机械故障证实了这些未添加抗氧化剂的部件的耐用性。虽然骨溶解尚未消除,但很少发生,并且迄今为止尚未引起任何临床问题。

证据水平

I级,治疗性研究。

相似文献

引用本文的文献

本文引用的文献

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验