Department of Biotechnology, Indian Institute of Technology Kharagpur, Kharagpur, West Bengal, 721302, India.
Bioprocess Biosyst Eng. 2018 Aug;41(8):1103-1113. doi: 10.1007/s00449-018-1939-7. Epub 2018 Apr 20.
Lipid accumulation in oleaginous yeast is generally induced by nitrogen starvation, while oxygen saturation can influence biomass growth. Systematic shake flask studies that help in identifying the right nitrogen source and relate its uptake kinetics to lipid biosynthesis under varying oxygen saturation conditions are very essential for addressing the bioprocessing-related issues, which are envisaged to occur in the fermenter scale production. In the present study, lipid bioaccumulation by P. guilliermondii at varying C:N ratios and oxygen transfer conditions (assessed in terms of ka) was investigated in shake flasks using a pre-optimized N-source and a two-stage inoculum formulated in a hybrid medium. A maximum lipid concentration of 10.8 ± 0.5 g L was obtained in shake flask study at the optimal condition with an initial C:N and ka of 60:1 and 0.6 min, respectively, at a biomass specific growth rate of 0.11 h. Translating these optimal shake flask conditions to a 3.7 L stirred tank reactor resulted in biomass and lipid concentrations of 16.74 ± 0.8 and 8 ± 0.4 g L. The fatty acid methyl ester (FAME) profile of lipids obtained by gas chromatography was found to be suitable for biodiesel application. We strongly believe that the rationalistic approach-based design of experiments adopted in the study would help in achieving high cell density with improved lipid accumulation and also minimize the efforts towards process optimization during bioreactor level operations, consequently reducing the research and development-associated costs.
在油脂酵母中,脂类的积累通常是由氮饥饿诱导的,而氧气饱和度会影响生物量的生长。在不同氧气饱和度条件下,系统地摇瓶研究有助于确定合适的氮源,并将其吸收动力学与脂质生物合成联系起来,这对于解决生物加工相关问题非常重要,这些问题预计会在发酵罐规模生产中出现。在本研究中,使用优化的氮源和在混合培养基中制定的两阶段接种物,在摇瓶中研究了不同 C:N 比和氧气传递条件(以 ka 表示)对 P. guilliermondii 的脂类生物积累的影响。在摇瓶研究中,在最佳条件下,初始 C:N 和 ka 分别为 60:1 和 0.6 min,生物量比生长速率为 0.11 h,获得了 10.8±0.5 g/L 的最大脂质浓度。将这些最佳摇瓶条件转化为 3.7 L 搅拌罐反应器,得到的生物量和脂质浓度分别为 16.74±0.8 和 8±0.4 g/L。通过气相色谱法得到的脂肪酸甲酯(FAME)谱图适合生物柴油应用。我们坚信,该研究中采用的基于合理化方法的实验设计将有助于实现高细胞密度和改善脂质积累,同时最大限度地减少生物反应器级操作中的工艺优化工作,从而降低与研究和开发相关的成本。