Laboratory for Computational Sensing and Robotics, Johns Hopkins University, Baltimore, MD, USA, 21218.
The Department of Mechanical and Automation Engineering, T Stone Robotics Institute, The Chinese University of Hong Kong, Shatin, N.T., Hong Kong.
Ann Biomed Eng. 2018 Oct;46(10):1650-1662. doi: 10.1007/s10439-018-2074-y. Epub 2018 Jun 19.
We present a novel semi-autonomous clinician-in-the-loop strategy to perform the laparoscopic cryoablation of small kidney tumors. To this end, we introduce a model-independent bimanual tissue manipulation technique. In this method, instead of controlling the robot, which inserts and steers the needle in the deformable tissue (DT), the cryoprobe is introduced to the tissue after accurate manipulation of a target point on the DT to the desired predefined insertion location of the probe. This technique can potentially reduce the risk of kidney fracture, which occurs due to the incorrect insertion of the probe within the kidney. The main challenge of this technique, however, is the unknown deformation behavior of the tissue during its manipulation. To tackle this issue, we proposed a novel real-time deformation estimation method and a vision-based optimization framework, which do not require prior knowledge about the tissue deformation and the intrinsic/extrinsic parameters of the vision system. To evaluate the performance of the proposed method using the da Vinci Research Kit, we performed experiments on a deformable phantom and an ex vivo lamb kidney and evaluated our method using novel manipulability measures. Experiments demonstrated successful real-time estimation of the deformation behavior of these DTs while manipulating them to the desired insertion location(s).
我们提出了一种新颖的半自动临床医生介入策略,以进行腹腔镜下小肾癌肿瘤的冷冻消融。为此,我们引入了一种无模型的双手组织操作技术。在该方法中,不是控制机器人将探针插入和引导到可变形组织 (DT) 中,而是在将 DT 上的目标点准确操作到期望的探针预定义插入位置之后,将冷冻探针引入到组织中。该技术可以降低因探针在肾脏内插入不正确而导致肾脏骨折的风险。然而,该技术的主要挑战是在操作过程中组织的未知变形行为。为了解决这个问题,我们提出了一种新颖的实时变形估计方法和基于视觉的优化框架,该方法不需要关于组织变形和视觉系统固有/外部参数的先验知识。为了使用达芬奇研究套件评估所提出方法的性能,我们在可变形体模和离体羊肾上进行了实验,并使用新的可操作性度量标准评估了我们的方法。实验表明,在将这些 DT 操作到期望的插入位置时,可以成功实时估计这些 DT 的变形行为。