From the Department of Orthopaedic Surgery, Hospital for Special Surgery, 535 East 70th Street, New York, NY, 10021, USA.
Weill Medical College of Cornell University, New York, NY, USA.
Int Orthop. 2019 Aug;43(8):1823-1829. doi: 10.1007/s00264-018-4141-2. Epub 2018 Sep 21.
Intraoperative pelvic motion can alter the perceived cup inclination and version during non-navigated THA. We quantified pelvic motion during different phases of primary THA performed in the lateral decubitus through a posterolateral approach.
Pelvic roll (rotation of the coronal plane) and pitch angles (rotation parallel to the coronal plane) were studied in 75 patients undergoing THA for osteoarthritis by four arthroplasty surgeons. Ten steps of surgery were defined. Angular motion was recorded with a miniature surgical device that utilizes inertial sensors.
The mean absolute roll ranged from 0.03° detected at the end of surgery to 4.13° detected during acetabular exposure. The mean absolute pitch ranged from 0.05° detected at the end of surgery to 2.54° detected during hip dislocation. The maximum pelvic roll and pitch detected during surgery averaged 17.62° (SD: 5.08) and 9.3° (SD: 3.39) respectively. Absolute roll and pitch angles were not affected by patient's BMI, sex, pre-operative hip motion, or surgeon. Before cup insertion, the greatest mean change in roll was observed during acetabular exposure (10.02° anteriorly), and for pitch was observed during dislocation (1.88° caudally).
During THA performed through a posterolateral approach, there is a progressive anterior pelvic roll that peaks before cup insertion. This can lead to underestimation of cup anteversion during non-navigated THA. The anterior roll does not completely correct, even when all retractors and external forces acting on the pelvis are removed. Pelvic pitch that could affect the perceived cup inclination occurs to a lesser extent than pelvic roll.
在非导航全髋关节置换术中,术中骨盆运动可改变感知的髋臼杯倾斜度和前倾角。我们通过后外侧入路测量了侧卧位初次全髋关节置换术中不同阶段的骨盆运动。
通过四位关节置换外科医生研究了 75 例接受全髋关节置换术治疗骨关节炎患者的骨盆滚动(冠状面旋转)和倾斜角(与冠状面平行旋转)。定义了 10 个手术步骤。使用微型手术装置记录角度运动,该装置利用惯性传感器。
手术结束时检测到的平均绝对滚动范围为 0.03°,手术过程中髋臼暴露时检测到的平均绝对滚动范围为 4.13°。手术结束时检测到的平均绝对倾斜度为 0.05°,髋关节脱位时检测到的平均倾斜度为 2.54°。手术过程中检测到的最大骨盆滚动和倾斜度平均为 17.62°(标准差:5.08)和 9.3°(标准差:3.39)。绝对滚动和倾斜角度不受患者 BMI、性别、术前髋关节运动或外科医生的影响。在插入髋臼杯之前,在髋臼暴露过程中观察到的滚动变化最大(10.02°向前),在脱位过程中观察到的倾斜变化最大(1.88°向尾侧)。
通过后外侧入路行全髋关节置换术时,骨盆会出现逐渐向前的滚动,在前髋臼杯插入前达到峰值。这可能导致在非导航全髋关节置换术中低估髋臼前倾角。即使所有的牵开器和作用于骨盆的外力都被移除,前滚也不会完全纠正。影响感知髋臼杯倾斜度的骨盆倾斜程度小于骨盆滚动。